How to temporarily withdraw the heating radiator

This article is aboutHow to temporarily remove a heating radiatorTo replace or paint wall him. remove the radiator it is not difficult as it might seem at first glance, this will be discussed in the article. First of all, you need to understand the consequences of a failed attempt to remove the radiator, if you do not know how to remove the heatsink correctly, later may appear to flow and you spoil the flooring on the floor. However, if you pay attention to our tips, you will eliminate all problems at once, at the time of the process radiator removal.

First of all we have to show you the main elements of the radiator: Right at the top - the control valve at the bottom of the left - shut-off valve (water supply adjustment), left upper - Majewski valve for venting of the heating radiator.

With the help of the control valve, you can adjust the flow of incoming water into the radiator opening or closing the valve, you will adjust its heating temperature by adding and subtracting it respectively. With the shut-off valve, you can adjust the intensity with which the water will come out. Most often, such a valve is used for balancing all the radiators and installed it on each.

First of all, shut the valve. Adjusting overlapping hands, and shut-off with an Allen wrench.

TIP: When closing the shut-off valve to remember how many turns you have done that then open the same amount.

Now you need to disconnect from the radiator valves. To do this you will need a pipe wrench or spanner. The apparatus consists of a crane American (removable coupling). Unscrew the nut for the American branch of the radiator valve.

TIP: In order not to spoil the flooring on the floor, beneath the radiator unnecessary rags.

Turn off the shut-off valve ...

Turn off the control valve as well... To be safe, use the second key is to keep the American union by unscrewing the nut.

The last step is to remove the radiator bracket. The best advice we can give you is that you remove the radiator with anyone, as a radiator with a very hard water. Such an operation requires at least two people.

COUNCIL: If you paint the wall behind the radiator, seal vents in bags or paper.

During the painting process or gluing the wall, put the radiator so that it will not scratch. When you have finished painting, hang bought new or old radiator on the bracket.

When the radiator hangs in place, connect the valve and the radiator using the tightening American. Spinning shut-off valve, remember the number of turns that you have to scroll down to block it and open exactly the same.

Open the control valve for the supply of coolant, thus you need to open the bleed screw to come out through the air and filled the radiator with water. Once out of the bleed screw drip water, shut it, it will mean that the radiator filled with coolant.

Thank you for reading our article on how to temporarily remove the heating radiator, and our other articles. Do not forget to like our projects and share them with your friends using social widgets.