How to assemble the shower (instruction in pictures)

Like the assembly of the shower enclosure with their own hands

With pallet remove the protective film, adjustment acrylic tray set in the designated place and connect to input the drain. Adjust pan horizontally and place it as close as possible to the final installation.
Rear side window fixed to the central panel by means of screws 5 on each side. Fix the holder for the shower.
Attach shower hose watering to one end and to the second adapter B4-3
Lock nut B11 adapter from the rear side cabin
Connect the hose to the adapter foot massager B4-3.
Lock nut B11 adapter from the rear side of the cab
Lock Holders tumbler stop (complete with mass-Jérôme)
Fix the glass shelf (for cabs 100h100sm) via two nuts.
Secure the mirror B5-1 two screws which are then put on a decorative cap and secure B6 handle using two screws.
Connect the hose to the adapter foot massager B4-3.
Lock nut B11 adapter from the rear side of the cab
Fix the holders massager feet (complete with massage.
Fix the glass shelf (for cabs 100x100 cm) using two nuts.

Secure the mirror using two screws B5-1 which are then put on a decorative cap and fasten using the handle B6
Collect the frame structure of the lateral columns and horizontal arcs and fix them with screws.
Coat the pan silicone sealant, install a frame structure on the pallet and fix it to the profiles of the rear windows with 5 screws on each side
Insert the door frame into the side profile and secure them with screws.
Set the side windows into the grooves of vertical posts, and on the other hand nascholknite front uprights.
Lock pillars with horizontal arcs using two screws (top and bottom)
The glass door fix a pair of rollers at the top and bottom (double rollers on top, single - bottom)
Install the door glass in the groove top of the arc. With latch button on the lower roller lock the door glass in the lower horizontal arc.
Secure the glass on the door handle and fix them using clamps, screws on the inner side
Remove the top of the roof of acrylic protective film in the roof insert shower speaker, a lamp, a fan and an upper shower. The entire length apply a layer of silicone sealant
Set the roof and connect it to the rear wall of the shower enclosure 3 via screws (each side)
Perform final seal all cracks and compounds of silicone sealer and leave to dry in a stationary position for 24 hours.
All connections of electric wires and connect the cab to the mains. Check for proper operation of all the service functions of the shower.