Useful content

Warming otmostki Penoplex save costs for heating, protect the foundation for 100 years

click fraud protection

Blind area - a part of the building, which passes around the perimeter and adjacent to the foundation. Blind area must protect the base from the destruction, melting snow, precipitation. It creates a finished look the house and the sidewalk is at a certain coverage.

Most importantly, the concrete strip foundation on the ground protects against freezing. But in this case carried out insulation of the blind area.

Warming of foundation is required when building stands on a foundation or melkozaglublennom have ground floor, heated in cold weather. Warming of the blind area helps to save on heating.

Warming Penoplex increases thermal insulation by 25%. Furthermore Penoplex successfully used polyurethane foam, expanded clay, and polystyrene. But the most effective yet penoplex.

Penoplex rot, mold infestation, is not afraid of moisture and frost. He served under the ground more than 100 years. Penoplex lightweight, environmentally friendly material with high compressive strength. You can not worry about the displacement of the blind area to the cap. After warming otmostki Penoplex walls remain dry and free of mold fungus.

instagram viewer

Process

Remove the soil, the depth should be from 20 cm. Make sure slant outwards from 10 to 40 degrees.

Pour sand - layer thickness of 10 cm. Lay geotextile on top. Next pour chippings (1-2 cm of grain.).

Set of the formwork board. Insulated cap on the perimeter by a bonding insulation boards. In addition fix screws with caps.

Photo taken from the site domsdelat.ru
Photo taken from the site domsdelat.ru

Then go to the warming of the blind area. Insulation thickness 50 mm. Penoplex sold 10 units. packaged. If you live in areas with harsh climates, then you need to put 2 Penoplex layer. On top lay a heater reinforcing mesh. This is necessary to load on the screed was carried out correctly. Reinforcing net with a mesh of 10 cm.

Pour the concrete mortar and straighten surface rule.

Photo: vitvesti.by/images/451/106/%D0%B4%D0%B0%D1%87%D0%B0.jpg
Photo: vitvesti.by/images/451/106/%D0%B4%D0%B0%D1%87%D0%B0.jpg

Upon completion of the pouring of the blind area surface should zazheleznit. To do this, fill a dry cement on the wet surface and covered with wet cloth on top.

After drying, to prevent cracks in the blind area make the expansion joints at 2 meters using a grinder. Fill gap with sealant.

Warming otmostki Penoplex provide reliable protection of the foundation.

Photo: moifundament.ru/wp-content/uploads/2014/06/isobrag2.jpg
Photo: moifundament.ru/wp-content/uploads/2014/06/isobrag2.jpg
Channel RemontDom: SUBSCRIPTION. Thanks in advance for huskies - all have a nice day!
5 nuances to reduce the cost of the heating system in the house.

5 nuances to reduce the cost of the heating system in the house.

Affiliate materialWhat is important to consider when installing heating in a country house?It is ...

Read More

New Russian development of a solid fuel boiler Suvorov

New Russian development of a solid fuel boiler Suvorov

Affiliate materialOne of the most popular types of heating a private house in Russia is a solid f...

Read More

How to choose a Christmas tree in a pot so that after planting it on the site

How to choose a Christmas tree in a pot so that after planting it on the site

Choosing a live spruce to plant in the garden after the holidayMore recently, an alternative to a...

Read More

Instagram story viewer