Useful content

We need to paint the pipe near the wall. Show me how to clean it up quickly

click fraud protection

There is absolutely no space around the pipe. In this case, it is necessary to remove the old paint, which has already peeled off, and somewhere to clean out the rust. Familiar situation?

This question arose extremely acutely after the house was sheathed with siding. The gap between it and the gas pipe that runs along the facade tends to zero. The first year after the renovation had to suffer. Then I learned how to easily and quickly cope with this task. I'm sure my experience will be useful to someone else.

Means of mechanization are useless in such conditions. With a hand tool, you also can't go around too much (it's easy to make holes in the siding with a metal brush or spatula). In fact of all possible options, only one remains - sand the pipe with sandpaper. But everything is not as simple as it might seem.

For the convenience of work, it is better to pre-cut the sandpaper into narrow strips.

It is best to cut the sandpaper into narrow strips.
It is best to cut the sandpaper into narrow strips.

The most obvious way to work is to run the sandpaper tape behind the pipe. And back and forth to start cleaning it. There - here, there - here ;-)

instagram viewer

An extremely ineffective pipe stripping method.

But it will not work normally to sand the pipe in this way. At least the first time. The fact is that sandpaper covers an extremely small area. Even if you change the position of your hands, there is still a "dead zone". We have to clean it up.

We have to clean the surface.

If you do not want to finish the work in six months, you will have to rub hard enough. As you can imagine, the ribbon in your hands heats up quickly. Feelings are not the most pleasant. You clean it 3-5 meters and you want to spit on everything. And in my case, the pipes are about twenty meters.

Over time, it seems to me, came to a better way of cleaning. Wrap the emery tape around the pipe twice. In this position, it evenly covers the entire area. You don't have to clean up anything.

The emery tape evenly covers the pipe diameter. The pipe is easy to clean in one pass.

This method has revealed the only drawback - you have to make a little more effort. But when you adapt, the process goes like clockwork.

That's all. Thank you for reading the article to the end. I hope you found it helpful.

SUBSCRIBE | GROUP IN VK

A simple tip to drill his own hands: he turns into a drill grinding machine - Overview

A simple tip to drill his own hands: he turns into a drill grinding machine - Overview

Any product made of wood will have a finished appearance after polishing. Grind the product, you ...

Read More

Simple home-made with ample opportunities. As it has done. details

Simple home-made with ample opportunities. As it has done. details

IN a recent publication I'm talking about homemade stanochke with ample opportunities. In this ar...

Read More

Choosing a real Kelo! How to distinguish?

Choosing a real Kelo! How to distinguish?

Do you know how to choose the right Kelo? In fact, the unscrupulous builders can build you a hous...

Read More

Instagram story viewer