How to remove epoxy resin stiffened with any surfaces, clothing

Epoxy adhesive - good assistant in daily life, is indispensable for the creation of jewelry, souvenirs, shoe repair, furniture and so on.. This is the most popular glue from the masters of all trades. Epoxy adhesive is composed of resin and hardener. After mixing 2 parts of adhesive is obtained which solidifies.

Frozen adhesive is resistant to chemicals, alkalis, some solvents. Frozen seam can be sanded, paint, varnish, drill.

Epoxy adhesive has good adhesion to the gypsum board, wood, cement, plastic and other materials.

Glue must be carefully used. But it is not always possible.

How to remove solidified epoxy adhesive from the surface? Despite the strength of solidified glue, wash it all - is still possible. But before you delete, you need to remember that you can damage the main surface. Therefore, try to trim tool correctly.

scraping

For this method requires a sharp object (knife). Suitable surface, durable to scratch.

Solvent

On sale is a special solvents. But you need to choose the following instructions to avoid damaging the surface. solvent for lacquers can remove stains epoxy adhesive (5%).

Suitable denatured alcohol, tetrafluoroboric acid. Sales also have specials. solvents: remover SP-6, DMSO, DMF.

Suitable conventional acetone. But to remove congealed glue necessary to soak the surface with acetone for an hour.

reheating

With the construction heated dryer surface. Drip onto the surface and remove knife acetone resin. After rag wipe the surface with acetone until complete removal of the epoxy adhesive. Just do not overheat the resin dryer to boil. Just be heated to a softened state.

freezing

With the cartridge of the refrigerant sprayed onto the surface. The frozen resin is removed with a sharp knife or spatula. if you are afraid not to damage the surface, you can split the missed first trimester glue a rubber mallet and remove the debris.

You can simply place in the freezer soiled clothes glue or other small items.

original ways

Soiled items in the epoxy resin is easy to clean stain remover - Dimexidum. It is sold for a penny at the pharmacy. Dilute with water (3: 1) and apply to stain for 30 minutes. Then can only extend things.

Through iron. To spread out the clothes on the board and top spots on both sides to put a paper towel. Iron to iron. A spot on the front goes on the wrong side. If it remains part of the epoxy, then scrub alcohol. After that extend in the machine.

Coca Cola. Some are convinced that drove an epoxy resin with clothing with this drink. Pour on the stain, hold 30 minutes and extend manually.

Channel RemontDom: SUBSCRIPTION. We thank readers for their attention and huskies!