The yellow paint, bold ceiling tiles from foam

If the tiles from foam on the ceiling turned yellow, gray, lost the freshness, you can update it by using paint. Tile for finishing ceiling chosen often.

It is a cheap material, lightweight and easy to assemble yourself. Tiles can be glued on the center of the ceiling, the lamp or the angle. The result is a smooth, beautiful ceiling.

stamped tiles

The cheapest. It is manufactured using a stamping press. Tile thickness is 5 mm.

injection tiles

In the manufacture of sintered polystyrene foam in molds under high temperatures. It turns solid, thick slabs (7 to 14 mm.).

extruded tiles

There is another tile manufacturing technology. When applied on the tile as a protective coating in wood, stone, metal and the like. D. tile thickness is not more than 5 mm. It is the most expensive form of tiles.

Tiles are well washed. The smooth surface allows you to use any means to wash. Suitable even cheap dishwashing detergent. It is impossible to paint such plates paint.

Injection tiles turn yellow over time. Tiles with deep relief more difficult to wet cleaning. If you do not want to use the chemistry, that is folk remedies to wash this tile. Mixed 1 table. baking soda with 2 liters of water. This solution was washed with yellow spots.

Often the ceiling is glued stamped tiles. Its surface gets dirty, yellow from the sun. Tile is almost impossible to wash, but can be painted.

tile painting

You can not paint any composition. Suitable water based paints or acrylics.

Paint, which contains acetone does not fit in the composition. It is impossible to paint the ceiling tiles stamped with oil, alkyd paints.

Acrylic compositions are good that the surface can then wash detergent compositions. The paint is not afraid of the influence of ultraviolet light. Minus only one - the high cost of ink compared to water-based counterpart.

Clean with a vacuum cleaner dust from the surface of the tiles. It can be covered with primer before painting. Primer - acrylic. A small brush or roller apply a thin coat of paint. If you apply a thick layer, the coating will bubble. After the first layer has dried, applying a second. If tiles with a relief pattern, it is more convenient to paint spray gun.

channel RemontDom thanks for your attention and subscription. Please Like - thank you and good day!