Tricks house masters: a strand of plastic bottles, without damage to drilling crowns and safe dishwashing

To work around the house has to make an effort and ingenuity. We offer a look and try to use these homemade ideas that are many times easier to work. Good advice for DIY applications.

The crown for drilling tiles

Convenient device. But the need to constantly wet the water surface of the tile. In order not to stop the work, do the following. Cut a thick foam topper that will fit snugly into the crown.

Moisten with water and foam insert inside the crown. When drilling foam inside and continuously squeezed water enters. It is very convenient and the work goes faster.

Glue

It so happens that the adhesive on the thread dries up and sometimes difficult or impossible to unscrew the cap. To avoid this, you need after working with glue a small piece of polyethylene screwed onto the thread and then spin the bottle. At other times it will be easy to unscrew the tube and glue does not dry up inside.

Wash the dishes

Use of chemistry for washing dishes, not many people like. Dish detergent remains. To wash away the harmful foam tape necessary to rinse the dishes about 200 times, and then wipe with a towel. Not every one of us does.

Means of food gets to our body and it is with serious consequences. To protect your health you need to use folk remedies. Mustard and soda in the proportions (3: 1) safe and washes the dishes perfectly. Saving water also pleased.

Tourniquet from a plastic bottle

Useful homemade from the usual bottles, plastic wrap wires. The tourniquet can fix a lot of wires. To a bunch of different wires do not lie in disarray, secure them with this harness. Cut off the bottom and the top of an empty bottle.

Cut the spiral stripes. On a nail or an iron rod anchoring beginning of the tape. Screw on the long nail. The end of the tape on the tape fix, clip or wire.

Now I need a hair dryer building. You can try a conventional hair dryer or a lighter at a distance. If there is no hair dryer, just lower the nail with a wound tape in boiling water for one minute.

Harness ready. Now it is necessary to disconnect it from the nail and apply as directed. Is wound on the wire harness. Now they will look more carefully and protect cables from kinks.

channel RemontDom Have a good day! Please Like - thank you for your attention and subscription.