Useful content

Do you need an ideal foundation plane to insulate it? I show on my house what is required and what is not.

click fraud protection

Perfect angles and smooth surfaces are only found in commercials. At a real construction site, everything is not so colorful, but that does not mean bad ...

Greetings to all lovers of country life, and those who still only dream about it. My construction continues, and on the eve of winter a new and important stage begins, which I did not manage to do last year.

Insulation of the foundation and a warm blind area.

And here, as in any business, there are some preparatory stages. And the main one is the preparation of the foundation surface for insulation.

I have a shallow foundation, or rather not deep at all. Only 100 mm is below the surface of the earth, and the remaining 300 are above.

I will put the insulation boards just below this depth.

I dug some soil to lower the plates to the desired level.

But here the question arises.

And how to attach expanded polystyrene to the foundation.

The easiest option is special foam glue. But this requires a flat surface. And here you need to set boundaries!

instagram viewer
I have seen several examples when people who call themselves professional builders brought the plane to just perfect condition. Like, this is how the insulation will reliably adhere to the entire surface.

And now the recipe from the self-builder.

I removed all strongly protruding parts, these are excess mortar from the first row of masonry and protruding waterproofing.

The diamond tip for concrete is a material ...
  • I also cut off excess aerated concrete, since part of the insulation is found on the bottom of the masonry. The pleasure of course is still white from head to toe 😁.

Eeeeee, everyone ...

βœ… No need to pull the ropes and check the plane. All bends or steps are irrelevant. Where the expanded polystyrene is needed, it will press, and where it cannot, it is not needed.

One recipe for all the resulting irregularities is a fine finish.

Well, how exactly I fastened the insulation panels so that they do not fall off uneven surfaces, read in the following articles.

Subscribe to the channel, there is the whole history of building a house from scratch.

And like it πŸ‘it's always nice.

Where and how to properly position sockets and switches in the children's room

Where and how to properly position sockets and switches in the children's room

The safety and health of children in any family should come first, therefore, when carrying out r...

Read More

Will OSB get cheaper in 2022? We make a roof without OSB, plywood and underlays (the cheapest roof)

Will OSB get cheaper in 2022? We make a roof without OSB, plywood and underlays (the cheapest roof)

After building the frame of the house, the builders proceed to the installation of the roof. now ...

Read More

Why preserve tools (chainsaw, grinder, screwdriver, etc.) in winter in an unheated garage, in the country

Why preserve tools (chainsaw, grinder, screwdriver, etc.) in winter in an unheated garage, in the country

Colds set in. The question arises: how to preserve, store tools in the country or in an unheated ...

Read More

Instagram story viewer