Useful content

Budgetary means to cover the floor, so as not to pylil

click fraud protection

Concrete floors - solid and reliable foundation for the floor. But there is one drawback of such a base - concrete begins to "dust". Upper floor layer undergoes mass loadings. Cement dust causes a lot of discomfort and harm to human health. Today will tell, than to treat the floor to avoid pylil.

Causes

- is not the correct composition of the solution

- is not the correct stacking technology

- in the solution quality components

To stop the destruction of concrete, cracking, peeling, it is necessary to treat the concrete with special compositions. It can be impregnated, paint, toppings, coating and other inexpensive means.

Topping

Photo taken from the site vest-beton.ru
Photo taken from the site vest-beton.ru

Topping - hardening the mixture to be applied to the top layer of the floor. It consists of cement, plasticizers, fixers. This will increase the wear resistance, thermal shock resistance. The surface is stable even when in contact with chemicals.

Toppings applied to the still wet solution. The powder was evenly sprinkled on the surface. But this method is time consuming and requires the use of special. equipment (trowel, called "helicopter"). But you can manually sprinkle formulation. Consumption topping per 1 sq. m. - 3 kg.

instagram viewer

Impregnation

The easiest way. Is applied on the concrete floor purified spec. impregnation with a mineral or polymer compositions. Mineral impregnation closing the smallest pores of the concrete.

Illustration: sevparitet.ru
Illustration: sevparitet.ru

There are organic impregnation: acrylic, polyurethane or epoxy. Apply 2 coats better.

acrylic used when the base will take heavy loads.

polyurethane - the most durable and strong. There is one drawback - not a pleasant smell when the composition is applied to the concrete. Such a floor will last for more than 10 years without dust.

epoxy impregnation - expensive, but quality, long-lasting.

All impregnation is applied to clean concrete floors without debris and dust. Or polyester fiber brush applied with a roller.

coloration

Before staining better primed surface. The primer layer 2 is applied in a roller or brush. The polyurethane primer has excellent adhesion to the concrete. The paint applied after 15 hours. There are epoxy primer and epoxy paint for concrete dust control.

inexpensive ways

Domestic masters recommend treating the concrete floor PVA and water (ratio 1: 8). Cheaply and efficiently. Home PVA dilute with water to obtain a liquid mixture. Better use of PVA or a PVA-m.

Another cheap way - to use an inexpensive latex. Dilute latex with water saving.

Another interesting option: in gasoline or acetone dissolve the pieces foam (any). Add a little xylene. Apply the platen on a concrete floor. Drying - after 3 hours. Benzene or acetone to evaporate and the polymer will remain and will not pass moisture and floor dust will not.

Channel RemontDom: SUBSCRIPTION. Place Like - thank you for your attention!
How to independently perform work on creating a foundation pit for a fence, installing metal supports

How to independently perform work on creating a foundation pit for a fence, installing metal supports

At the time of the main construction work, I installed a temporary fence on the front side of the...

Read More

DIY heat-resistant paint

DIY heat-resistant paint

Almost everyone faced such a problem and did not know how to paint a fireplace, radiators, stove,...

Read More

How to grow peppers room in the home. A few important rules

How to grow peppers room in the home. A few important rules

Ornamental plants are able to decorate and transform any room in the house. Bright colors of bud...

Read More

Instagram story viewer