What is the best way to waterproof a basement ?!
I, like many builders I know, am sure that the most competent way is to install basement protection space is better integrated using external and internal insulation, as well as a drainage mechanism drainage system. Lyuba waterproofing work will not be of high quality without additional preparation. Depending on the stage of work, some points may be missed. In this article I will tell you about the correct technology basement waterproofing.
1. First of all, do a blind area analysis. Its width should not be less than 100-150 centimeters. It should not contain large and deep cracks, as well as other mechanical scratches and chips. If necessary, remove them and make the blind area more durable.
2. Next, take a full look at the basement. You need to identify the sources of moisture. Pay the most attention to this in the process.
3. When creating waterproofing basements
with your own hands, regardless of what material you choose, the work is done according to a single scheme. Clean open surfaces from excess flaws, close all holes and cracks, apply a primer.4. It is best to start waterproofing from the floor. The edge of the waterproofing material should rise to the top of the walls to a height of 300 millimeters.
5. Next, lay a layer of material on the walls. in such a way that it, in turn, falls on the pre-coated floor by at least 150 mm.
6. The work ends with the installation of the ventilation system. Two types of ventilation systems are suitable for basements: natural and artificially created. Natural ventilation has a pull and pull mechanism. The air circulates in it using physical laws. It also assumes the presence of special holes (vents) in the foundation of the room. The artificially created system involves the installation of additional fans and drying devices inside the entire building. The ventilation system will work together with the waterproofing to protect the basement from moisture.
Today you can find many different materials that are useful for waterproofing the interior of the basement. The easiest-to-use option available is considered to be an insulating coating. Its advantage is the ease of filling the joints, which is especially important when installing waterproofing with your own hands.
And also on our channela lot of useful and interesting informationfor construction, finishing works, design, landscaping and much more! Therefore, do not forget to subscribe to the channel so as not to lose us!
How to properly waterproof your bathroom floor?