The well near her house

One of the main problems in the country site is water. How to make so that the water problems in the country did not arise? The best solution would probably be to build on its site well water.

If you have weighed the pros and cons, and decided to drill a well, first of all need to decide what you will do well in their area on the sand or limestone. Sandy aquifer is located closer to the surface, and therefore, hole depth will be smaller and accordingly it will be cheaper. But here there are some nuances:

- First sandy aquifer is not uniform, and if at the same place there is water, it is literally a few meters it can not be.

- In addition, the water in this well may not be sufficient to meet all your needs in the water. Well made on sand, on average, gives five hundred liters of water per hour.

The water limestone rocks a lot, she's almost never ending. Well, it made to Limestone able to lift 3 or more cubic meters of water. If you need a large amount of water, your choice well in the limestone.

Choosing equipment for the well must pay attention to the pump, you want to install. All pumps for wells differ in many ways, and to entrust the choice of the best professionals who will be able to choose the pump, taking into account all the individual characteristics of your wells.

Equally important is the well casing. From the quality of the casing is directly dependent and durability of the well. Thus, for example, steel casing for wells there are several types of C-3, C-5, C-20. The higher the figure the marking tubes, respectively, and the higher the quality of steel, and hence the well will last longer. If your intention is not low-budget well and expect that it will have to work a long time, then better equip the well in addition to steel pipes and even plastic inserted in a steel casing pipe. This will block the surface water from entering into the well when in the steel pipe are formed so-called a fistula.

Let's move on to choosing a location for a well. Determining the location for drilling a well in the first place it is necessary to provide access to the site of heavy drilling equipment. There should be no any underground utilities. Should not be held near a power line, as usual drill rigs mast high and can trigger electrical circuit.