Ways to use plastic clamps in everyday life

Greetings to the Kulibins and the homemade ones. I hope everyone celebrated the New Year great, even if you don’t remember it)) Today is January 4th and it’s time to wipe your eyes. And in order for the sober to start working as usual after the holiday, I offer my readers a light load in the form of several life hacks with ordinary plastic clamps. Perhaps the post is banal, but I am sure that some will see something interesting for themselves here.

Organization of cables

This is an eternal problem for me. The web of cables is already pretty fed up and I went to the Internet for an option and found it.

We put several cables together and fasten them across with one clamp, only the clamp is not immediately clamped.

Now, between each wire, we start another clamp along the line of wires, as in the photo.

Now we first clamp the large cross clamp, then the small ones between the wires.

Of course, we cut off the protruding ends, after all, we are aesthetes and we should have everything not only functional, but also beautiful.

instagram viewer

I also hung a tag on each of the cables from masking paper tape and signed each wire.

Phone stand

I don’t use a phone case, it’s what I have since birth, naked. But sometimes I really need to put it on the table, especially when I watch videos with life hacks. I now have a clamp stand that I am using. I put the phone on the kitchen table, my wife pours dinner, I turn on "Ural dumplings" and rzhu))))

The stand is outrageously simple. I tie two clamps across the phone body and bring the tails to the back cover.

These ponytails serve as a support for the phone. The photo shows how it all works in practice.

Beer glass handle

But this is just a mega useful find for me. The fact is that my comrades and I go to the bathhouse every Sunday. We have a tradition, in the bathhouse without vodka, only beer and fish. Usually we take the big and fat Lyashcha, I take my glasses.

Since the fish is fatty, several glasses have already gone to another world just because they simply slipped out of their hands. This problem will now be resolved.

We tie two clamps around the glass, but do not clamp them, as in the photo.

Now we are making a handle. We take 3-4 clamps and thread them under those that we put on the body.

Now we clamp the clamps around the body of the glass and begin to assemble the handle. Just connect 3 clamps as shown in the photo. Cut off the ends.

The handle for the glass is ready. Checked personally, a little uncommon, but then normal.

Cushion hanger

It sounds strange, but it happens. Personally, I have never hung a pillow on hangers, but maybe someone has such a need. By the way, this way you can dry the pillow well in the wind after washing.

We take two metal hangers and fasten them with a clamp as shown in the photo.

Then we stretch the hangers, the pillow is not small.

We put the pillow between the hangers and hang it to dry or just ventilate.

Binding for sheets of paper

Plastic clamps can be used to bind office paper sheets. The photo, of course, shows the most primitive option, but as an idea it may well help someone out.

I also saw such a chip, from the clamps they made a handle for rotating the camera lens.

The excess tail is not completely cut off, a small tip is left, which is taken by hand and the lens is rotated. I don't know how handy this is, since I don't have such a camera down. Write down in the comments if such a device is needed or is it just ordinary useless nonsense.

And I also took note of it. A clamp for a hot pot handle)) I always look for an oven mitt and never find it on time. And then once and that's all. And I didn't scald my fingers and the lid was under control)))

Well, that's it. I'll close and wish all of my readers a fun New Year's Eve. Be healthy, Peace and Good to all.

And yes. Below I picked up links to popular articles, according to readers. Perhaps you will be interested. Click, like and subscribe. Goodbye to everyone.