The putty assembly foam and how to clear it from plastic, metal, wood, skin

Polyurethane foam excellent material. It serves as a thermal insulator, sealant retainer. Polyurethane foam of high quality will last decades, without changing the properties, but with proper protection from ultraviolet foam.

Today let's talk about whether it is possible to putty mounting foam after installation of doors or windows, and how to clean the foam on all surfaces.

assembly foam You can and should protect putty or plaster. But applying the usual plaster must be followed applied layer thickness.

For example, plaster on the mounting foam is 5 mm. easy selling even a finger.

Therefore, experts recommend to apply first a layer of plaster, putty and thereafter. The foam has a plurality of pores and a good basis for a plaster. It can be done by mounting the dried foam additional incisions.

Some protection foam using water-resistant tile adhesive. To protect the outer seam sometimes used Stiz A (sealant). For sealing foam indoor use Stiz B.

Polyurethane foam needs to be protected. She does not tolerate moisture and direct sunlight. Incorporation usual

plaster It will cost inexpensive, but it is not the best way. Possible freezing of the window and subsequently the occurrence of condensation. This will serve the cause of mold and mildew.

The best way to protect foam

There are special formulations (putty for mounting foam). Putty suitable for sealing gaps on the mounting foam inside and out. Putty with reinforcing microfibers pmozhet fill the gap depth of 10 cm. The composition includes components that protect against the appearance of mold and mildew. High resistance to cracking. Environmentally friendly, does not contain toxic components.

Dries up and becomes like a stone in 48 hours.

It should be ready to plaster on the mounting foam a little more expensive than usual - about 120 rubles for 1, 5 kg. Price depends on the manufacturer.

How to clean the foam core with plastic, metal, wood and others. surfaces?

After the work done sometimes necessary to remove foam remnants from the surface. Plastic profile help launder means of pharmacies under the name "dimexide». First, the dried foam cut from plastic. Remains wipe with a cotton pad soaked in Dimexidum. You can wash it means the skin of hands or clothing.

channel RemontDom thanks for your attention, huskies and subscription. Have a good day!