Technology for imitation of paving stones on monolithic paths

Paving stones can be imitated using the printed concrete technology. In this case, expensive forms are used, it is difficult for one to quickly stamp a large area (you may not have time before the concrete hardens). There is a risk of cracking on a monolithic surface. And dividing the surface with many segments will not be very nice.

The process and result of creating a decorative surface using printed concrete technology.

Another option: get an inexpensive plastic mold (600-1000 rubles) and cast such paving stones immediately on the paths. There are several types of forms on sale. This is one of the easiest ways. The disadvantage of this method: each element is obtained separately as paving stones and later grass will grow through the seams.

Molds for casting can be welded by yourself. They will be more durable. For the blind area, this method is also not suitable - water should flow from the surface to the side, and not immediately seep into the ground.

Another way is to make an imitation of paving stones with such an embossed metal frame without continuous seams. You can cook it yourself or ask someone else (cut metal strips in advance). It is even made from old corners and two pieces of reinforcement. On the basis of a vtormet, the metal price is 25 rubles / kg. A good way to learn how to cook with no welding experience.

This method is quite widespread in other countries. But for some reason, we rarely use it - they just fill the paths with concrete. With a little more effort and you can get an exclusive look. Now there are many available methods, descriptions, videos. And this method is one of the.

If you are proficient in working with metal, then you can make such molds to simulate the pattern in monolithic tracks. And the forms themselves can be produced for sale.

Before starting the process of imitating paving stones on the concrete surface, you need to walk with a textured roller. The roller itself is made from ordinary, coated with silicone to obtain an uneven surface. Before working with a roller, concrete can be sprinkled or 1-2 types of pigment can be applied to it - there will be a color imitation of a stone.

What else is this technology good for? The fact that grass will not germinate in the cracks. It is ideal for a blind area around the house. And if for some reason the concrete cracks (temperature compression), then it will be done at the seams and the crack will not spoil the surface. But it is better to make expansion joints in advance.

The process is shown in detail in this video. The shape for imitation can be cut out of a piece of pipe 100x60 and slowly imitated with this piece. By the way, the video shows the density of the concrete solution. For greater strength of concrete, it must be the most plastic and least wet. Add plasticizer and use less water.

***

Photos are taken from open sources, from Yandex. Pictures

Subscribe to the channel, add it to the browser bookmarks (Ctrl + D). There is a lot of interesting information ahead.