Installation of the roof: the basic mistake that even experienced craftsmen
Errors in the construction of any building object inadmissible. Their price is too high and may be calculated not only in currency notes. The construction of the roof is not an exception.
Wrong organized process, defects or errors can nullify the success of the event. But, unfortunately, it is in the construction of the roof and its mounting defects can be admitted at any stage.
The main mistakes of different stages of installation of the roof
1. Error in the project documentation or its absence
It is impossible to build a house "as in the neighboring property," or "in this magazine." Any construction project should be built according to the standards and regulations.
All aspects of the construction found in the technical documentation. If the customer does not have the necessary technical and project documents, the time available for work increased considerably.
2. install snow stop
The entire perimeter of the roof snow stop must be installed. If this is not done, the roof and gutter system can be deformed.
3. complex projects
The construction of the roof of unusual species requires more funds and effort. Increased consumption of materials, time of work and their value in use would require additional maintenance.
The more complex the construction site, the more likely that will be admitted to any miscalculation in the design. All these problems are amenable to solution, but they should be considered.
4. compactor
To the roof is not dripping and there was a draft, take care of seal. Podkonkovy seal is a must. If he does not put it in strong winds around the perimeter of the roof will blow out the air, fall rain and snow. In order not to alter, use the seal.
5. Savings on materials and specialists
When purchasing materials you should not rely solely on price. Each of them plays a significant role: waterproofing membrane, insulation, means "antiseptic" lumber - everything matters. Saving even one thing reduces the service life of the roof and its reliability.
6. wane
If you decide to put on a crate edging board, you need to carefully remove the bark from the tree. After this process the board has a good protective impregnation, for example Pinotex. If you do not remove the bark, then zavedutsya bugs and other pests, and it will damage the tree.
7. Correction works customer
Control - this is good and necessary, but interference in the work and try to do everything "in its own way, so be it is not according to the rules' can lead to tragic consequences.
channel RemontDom - zen.yandex.ru/remonts wants quality repairs! Sign up, we thank you in advance for huskies.