Useful content

Typical wiring errors that will cost a pretty penny to the apartment owner

click fraud protection

Most household appliances have a high power consumption. Most of the problems arise for this reason and incorrect wiring. Let's discuss today the mistakes and shortcomings in the installation of wiring, which will cost the owners a lot of money.

It is necessary to draw up a diagram, a sketch of the location of the wiring completely throughout the apartment.

Many people save money and buy cheap electrical products, which often and rather quickly fail. They cannot withstand such loads. The result is a short circuit.

Photo: elektrikpobedit.by/wp-content/uploads/2019/10/2019-09-29-15-23-44.jpg
Photo: elektrikpobedit.by/wp-content/uploads/2019/10/2019-09-29-15-23-44.jpg

It is not recommended to twist aluminum and copper wires. It is better that all wiring is made of copper. There are specials for such a connection. connectors. For example, a wago connector. Although experts do not recommend using it. It often overheats and breaks down quickly. This connector is used only for lighting.

There is another type of connection - transition terminals.

Still, some do it for twisting. In some cases, this is an option. But before that, strip the wires, then twist, and then solder and insulate with heat shrink with glue. Solder with tin-zinc solder.

instagram viewer

Or as in the photo below: steel washers and bolt.

Image: domikelectrica.ru/wp-content/uploads/2018/02/25-2.jpg
Image: domikelectrica.ru/wp-content/uploads/2018/02/25-2.jpg

Consider future wiring before installation and make a reserve of power. Many people think that if a hairdryer with a light bulb will work in one of the rooms, then why do we need powerful wiring. Remember that time will pass and in this room it will already be necessary to connect an additional heater or other device.

It is necessary to lay the wires only in a vertical or horizontal plane. You cannot chase the walls for diagonal wiring.

Photo: cs8.pikabu.ru/post_img/big/2016/02/07/11/1454871319134412602.jpg
Photo: cs8.pikabu.ru/post_img/big/2016/02/07/11/1454871319134412602.jpg

In panel houses, it is impossible to carry out slitting. The thing is, over time, you may want to hang up a shelf or painting and start hammering in a nail or drilling a wall. It is better to do everything according to the scheme and know in advance where the wiring is located.

To remove the insulation without damaging the veins, take the money, buy a special. tool.

Divide the wiring into groups. It is not recommended to install a common machine. Thus, in unforeseen situations, the machine will de-energize the room, and power will remain in other rooms.

Photo: vashtehnik.ru/wp-content/uploads/16212.jpg
Photo: vashtehnik.ru/wp-content/uploads/16212.jpg
Channel RepairDom: subscription. We wish you all the best!
Technology "Washed concrete." Examples of the best products. Part 1

Technology "Washed concrete." Examples of the best products. Part 1

In the process of studying information on obtaining decorative surfaces from natural pebbles on t...

Read More

Building of private houses under the key

Building of private houses under the key

Modern technologies allow to build a low-rise building houses of any material quickly and at reas...

Read More

What and how to feed chrysanthemum summer. By the fall of magnificent bush covered with flowers!

What and how to feed chrysanthemum summer. By the fall of magnificent bush covered with flowers!

Autumn flowers - last smile warm sun before winterWelcome channel subscribers and casual readers,...

Read More

Instagram story viewer