How easy it is to defrost, warm plastic pipes underground without digging

Sometimes unforeseen situations arise. For example, water freezes in a plastic pipe. This often happens in private homes. How to defrost pipes underground? Digging frozen soil is not an easy task and the pipes can be damaged.

Here are some ideas for defrosting plastic pipes underground. Share your experiences.

If the pipe is frozen on the outside, the reason for everything is insufficient insulation and improper installation. If this happened in the ground, then the communications are not at sufficient depth. In the summer, it is better to lay the pipes correctly - below the freezing point of the soil. You can also insulate the pipes for greater fidelity. Some put empty plastic bottles around pipes.

The firstWhat comes to mind is to make a firewood fire at the place where the pipes pass. Some people use old tires. The ground and pipes are warming up.

Second way. Dissolve rock salt in water. Then pour the brine into the pipe. The traffic jam will decrease over time. But it can take a long time (several hours).

Third option. Unscrew the pipe in the house and try to pour hot water. This is a long process and does not always work.

Fourth way. Pour water into a gas cylinder. Get some water. About 3-5 liters of water. A soldering iron is placed and the bottom of the cylinder is heated. A thin tube is inserted - one end into the balloon, the other into the tube. The pipes are defrosting with steam.

There is an easier solution.Use regular household steam cleaner. Extend the spout and push it into the tube. The ice plug will disappear in a few minutes.

Many have tried autoclave to solve the problem. Or this way: pressure cooker for defrosting. Connect the hose instead of the valve and push the other end of the hose into the frozen pipe. They say that literally for 15 minutes you can defrost an ice plug up to a meter.

And how are you defrost pipes?

Channel RepairDom: subscription. Thanks for the likes and good luck!