How to save the started polyurethane foam so that it does not dry out? How to unscrew a gun without consequences, cleaning
Even those who are not engaged in professional construction and repair have tried to use polyurethane foam. This is a great tool that can fill in different gaps, seal joints, etc.
On sale, foam can be bought in cylinders. The material is not cheap, so everyone is trying to save leftovers in order to use them later.
How to preserve the foam if it still remains in the cylinder?
It often happens that all the foam is not used in the work, and it is a pity to throw away an almost full cylinder. How to save it correctly? One condition is necessary that the adjustment screw is tightly closed.
It is necessary to store foam in an upright position. Do not store the cylinder in a hot room or near a heat source. If not all of the foam is used, then you should not unscrew the gun. It serves as a stub.
In this form, it can be stored. And when you want to use it, you simply peel off the foam from the end of the gun nose and remove a little inside. Now you can use it again. After work, put the foam cylinder upright again and it can stand up to a total of 10 months.
If the bottle with plastic straw, then we do this. We put the can upright and let the foam come out of the tube and freeze. Store in this form. After a while, you can use the foam, but first cut off the end of the tube with scissors.
What happens if the gun is unscrewed from the cylinder?
If you need to unscrew the pistol, in which the contents still remain, then you need to let the cylinder settle vertically for several hours. Immediately not recommended to shoot. The rest will drain to the bottom, and only compressed gas will remain on top. Before shooting, do not shake.
Another important thing: you need to do this outdoors.
There are often times when foam breaks out and splashes everything around. Ideally, it is best to unscrew the gun when there is no foam left in the canister.
Put on gloves and glasses and have a trash bag ready. Put a balloon in it. Prepare a box or bucket you don't need. Start unscrewing carefully. If successful, clean the nozzle with a special liquid. Use Dimexide for cleaning.
Channel RepairDom: subscription.