Round and rectangular hole in the tile without chipping
Each master has its secrets in the work of repair. To lay tile and do not undercut one impossible.
For cutting tiles using grinders, Tile (manual) or Electrobar, nippers, glass cutter, use a nozzle for a drill or a saw for ceramics.
tiles often cut in a straight line. But what if you want to cut flat rectangular or circularhole? When cutting tiles, consider the seams.
jigsaws - the best for many tools for cutting tiles. Clean cut without chips possible with special saws for ceramics. These saws are usually without teeth. On the edge of the saw blade coated with diamond coating.
Look for stores with the DIA label. But some manufacturers sometimes other markings.
How to make a round hole in the tile
For best cutting, lower the bar of a few minutes in the water. Then, draw and drill holes circuit inside the disk in anywhere.
Next jigsaw and tile sawing for a walk along the marked lines. Get a smooth hole in the tile without chipping.
Quickly and precisely to get round hole and will drill bit with diamond coating. Drilling is important at low speeds.
How to make a smooth rectangular hole
The marker marks the contours of the rectangular opening. Using the same jigsaw pass on the 2 parallel lines.
It now remains to be cut to 3 lines. Take a glass cutter and spend on it. Try to exactly draw the line glass cutter (the first time). Now you need to break a piece of pliers tiles.
There is one minus: steklorez can not cut floor tiles.
channel RemontDom wishes a successful repair. Subscribe Like place - thank you.