Our pool with a pavilion. Mounting the bowl
Assembly, filling, how to protect water from blooming
Spring is approaching, and then summer is at hand, it's time to think about suburban leisure. For those who cannot imagine their site without a swimming pool, FORUMHOUSE has prepared another story in the first-person publication cycle. In the family Jazzmeen inflatable the pool appeared before the house and while the construction was in progress, "roamed" around the yard. Finally, hands reached him.
Jazzmeen
Participant FORUMHOUSE
My story about building a swimming pool with a pavilion
Installation of the pool in the pit
Unfortunately, we did not take a photo during the assembly of the frame. As always happens, it was on that day that there was a strong wind, and we could hardly cope with the sheets of metal, which constantly strove to fall or fly away. Having assembled the frame, we laid geotextiles on the bottom of the pool, and then pulled the liner (bowl). We fixed it on the edge of the frame, and poured a few centimeters of water. Then they straightened the liner and installed the sides. Then a sand filter was installed and the rest of the water was poured. The outside walls of the pool were lined with insulation (EPS boards) 2 cm and backfilled with excavated soil.
At this stage it was already possible to start swimming, which we happily did.
How to prevent pool water bloom
Naturally, we began to monitor the purity of the water. Even in the old pool, we used various methods: whiteness, various chlorine tablets (fast and slow dissolving), but at the time of the installation of the new pool, we settled on peroxide hydrogen. Because once, back in the old pool, when our water bloomed strongly, and we got an almost green soup, only hydrogen peroxide helped us. We were able to purify the water and until the end of the season it did not bloom anymore. Until the end of the first season of the new pool, we only used hydrogen peroxide.
We swam until the end of October. In the end - only after the steam room, of course. In early November, we removed the sand filter, drained the water below the level of the nozzles, and stretched out a rope with five-liter bottles filled with sand. Some people think it doesn't work, but we did it anyway.
Don't feel sorry for the likes!
How we build a pool with a pavilion:
- Preparation
- Mounting the bowl
Subscribe to the channel, we have prepared a lot of interesting and useful publications. Make a repost in your social networks, for sure, some of your friends will find this experience useful! Join the FORUMHOUSE!
How do you keep the pool clean?