Useful application of drip systems - useful to everyone

Greetings, dear readers of our Ideas!

Tips Today - I was shown the drip systems application before going on vacation. I honestly did not know about them. Rather, I could not think that these particular systems can be used. The only thing I saw the use of these systems is at work, our programmer using it brought out (diaper) a stream of waste ink on an inkjet printer outside (if, of course, correctly described this).

Just before leaving, I used to make the similarity of the first option from ordinary ropes with a can of water. But soon spring and these adaptations will be useful to everyone not only for indoor flowers and plants.

So, in order. Systems are inexpensive, you can even buy specially for convenience. I had them after the course, but I have kept them for future use and will not throw them away anymore. It turned out that you can attach them to the lid of a plastic water bottle, building a kind of drip irrigation system. If you take a 2-liter bottle or even a 5-liter bottle, then you don't have to be afraid to go on vacation for a long time, for example. Seedlings will not disappear, flowers will not wither.

Live in a city and only go to the dacha on weekends? Then all the more you can build such an automatic irrigation device in a greenhouse or just on the beds. It is possible without a needle, it gets clogged with earth and does not let water through. You can just immediately stick the tube into the ground, and the regulator to make the water supply little by little.

I even saw such a photo on the Internet with a funny caption:

But for a week in the heat, these bottles are certainly not enough. My neighbor in the country is my ardent assistant in collecting useful inventions, he told me that a system tube can in principle attach to a water barrel next to it. Then there will be no problems at all, you can go to the dacha only on weekends, without fear that from the heat all the seedlings will bend or dry out.

And you can even go on vacation to the sea, if possible.

The next tool will soon be useful to almost everyone. It is very easy to build a system for collecting birch sap from the dripper system - my favorite spring drink and very useful. February will fly by quickly, in March we will again feast on a truly magical liquid.

You can use a screwdriver, but last year I coped without such a large tool. Who would want to trudge with such a load, if without a car? Only if men. And we girls, for example, have to drag the juice back to the house. Therefore, we coped with the improvised tool.

A special knife is enough to carefully pick out a hole in the birch. Insert the end of the system, opposite from the tip for the needle, into this hole. The needle is also useless here, you can immediately lower the tube into the bottle (on the ground) and it drips very well. The main thing is not to forget to remove the regulator or open it to the maximum. The upper end, which you stick into the birch, needs to be fixed, wrapped, and you can even stick it over the adhesive tape with clay, if required.

And yes, do not forget then only the hole from which the juice was taken from the tree, glue it up, close it up. Don't make birch trees cry and sap. And by the way, the hole can be repaired with garden pitch or replacement - with a mixture of glycerin with wax and paraffin in equal proportions. But you can also use plasticine, it is also suitable for children, it does not even give allergies, and therefore it is also harmless for the tree.

THANKS IN ADVANCE FOR LIKES;) AND SUBSCRIPTION TO THE CHANNEL.

How easily I "crack" a walnut. The core remains intact

I never throw away Chinese sushi rolls. I tell you why

What do I do to make the screw cap of a glass jar open easily with my hands