Diy ladder from reinforcement and concrete mortar to the boiler room

Few people know that a beautiful and relatively inexpensive staircase can be made with your own hands. In this case, it is not necessary to resort to wood. It is not difficult to create it from reinforcement and concrete mortar. Below is how to complete the assembly of the staircase step by step.

Preparation

To assemble a metal ladder yourself, you do not need to have any special skills and knowledge. You just need to follow the instructions and think about each action.

Before starting work, you need to take the necessary tools, namely:

1. welding inventory machine, since it is easy to use;

2. an ordinary saw, a semi-professional grinder, sandpaper;

3. centimeter, clamps (to create wooden steps);

4. electric drill and set with drills, self-tapping screws and circular saw;

5. cement mortar and a set of formwork boards.

Previously, it is worth preparing a project with a future staircase. It can be generated personally from open sources or ordered from a company. Such sources are often found on the Internet.

To create a classic metal staircase, you need channels with corrugated metal steps, steel fillets, welding points and brackets for attaching the steps. According to the project, you can calculate the required number of fittings, metal sheets, pipes, metal profiles and other materials.

Note! Before starting work, third-party metal blanks should be welded on a tabletop. It is necessary to start finishing work only after mastering the welding techniques.

Creating the simplest staircase

To make a staircase, you need to create a frame - a channel placed on the edge. When planning the final planking of stairs, it is necessary to prepare boards or sheets of metal. For steps, it is better to take bulk metal sheets or other non-slip material.

So, you should cut the reinforcement into supports that are placed on the beam. The volumes with the required number of bases should be selected according to the project.

The next step is to weld the mounting brackets to the base. Then the steps will be laid there.

The third step is to place the filly to the channel rib. The prepared markup, which is done according to the documentation, can help in this procedure. For a classic staircase, a pair of stringers or bowstrings are suitable. With the impressive dimensions of the flight of stairs, it is necessary to equip it with several supports.

Note! The fourth step is to assemble all the elements of the staircase into a single piece by welding. The penultimate step is to treat the metal with a primer. After it dries, it is necessary to cover the reinforcement with an anti-corrosion compound.

At the end, a small formwork should be made and the staircase should be filled with cement mortar. As a result, you get the basis for the subsequent decoration with tiles or other cladding.

p.s .:Subscribeper channelMy house- all the most important, useful, interesting is yet to come!Here everyone can share their experience in building, repairing and arranging housing, a suburban area, send photos, tell us about your summer cottage, house, apartment.

Read also:

How to save on heating in Budapest

Why we decided to make floor heating in the apartment