How can you put yourself in the bathroom tiles, if the floor is wooden floor

This article focuses on a very important topic - how can you put the tiles in the bathroom, if the floor is wooden floor without using the wizard.

For each person the most important place in the apartment is a bathroom and a kitchen. These rooms provide a general impression of the whole apartment, and those who live in it.

The most important thing that you should pay attention - this is the floor surface. If the floor is not flat, then put the tiles will not be possible. And if the floor is wooden, and is not real.

Currently, there are many technologies that allow a lot of different ideas that would seem at first glance, is quite impossible to bring them to life.

The easiest options are not interesting, this is worth considering the most complex version of the floor - a floor with wooden floors.

In order to prepare the floor and put it on a tile - it is necessary to lay on the floor GVL.

GVL is gypsum sheet. This material was a mixture of gypsum and cellulose and other additives which does not have the cardboard cover.

After that GVL will be attached with screws to the floor, you need to check whether there are any gaps at the joints between sheets of gypsum fiber board. For this fit a special water-resistant adhesive.

Once the glue is dry, it is possible to proceed to the next phase of work.

The next step - the primer GVL.

The primer must be taken specifically for outdoor and indoor applications. In order to align the surface of gypsum fiber coupling.

When the primer dries, you can continue working.

Next stage

After a floor has been prepared, it is possible to proceed to the next step and apply a solution which equalizes the floor surface. This requires a special blend for floor screed. Applied solution special spatula, gently leveling the surface of the mixture. Then, when the screed is applied, it is necessary to wait until it is completely dry, about a few days.

When the screed is dry, you can proceed to the next, the most important stage of work - laying tiles.

In order to lay the tiles need a special glue. And do not skimp on this, and it is better to buy one that is most in demand. This can always be found at the sales consultants.

Of course, in addition to the adhesive it is very important to buy a plastic crosses, which will help to distribute the tiles and keep the necessary distance between them.

The adhesive is applied on the tiles, and then later applied to the surface of the floor.

Still important factorWhen the tile is laid, to provide good adhesion between the adhesive and the tile floor, it is necessary at the time when laid, to move its tile on the floor, pressing down a little, and then set the tic for interface.

Yes this sounds complicated, but it is doable if you follow all the advice.

p.s .:My HouseHe is trying to give you the most important, useful information.subscribe to the channel - in front of a lot of useful and interesting information!