Ready made DIY set of high voltage generator - electronic lighter

Hello dear subscribers and guests of my channel! Today I want to tell you about a great DIY soldering kit, namely a high voltage generator that can be used as an electronic lighter. So let's go.

Purchase and delivery

To begin with, I want to say that I bought this set in the well-known online store. And the purchase cost me 116.54 rubles with free shipping.

Of course, what was a little upsetting was the rather long delivery, which took a whole month. But come on, the main order came safe and sound.

Equipment

So, the following parts are included in the package of delivery:

1. A board on which all the details are painted and, in principle, a circuit is not needed at all for assembly.
2. Resistance. 33 Ohm / 1 Watt.
3. Capacitor - 470 μF.
4. Diode - 1N4007.
5. Transistor - MJD3055.
6. Terminal block - KF301 - 2P.
7. Button.
8. Transformer.

Preparing for assembly

So, the set is finally received, now you just need to assemble and test it in work. And in order for the assembly to be as comfortable as possible, the following tools should be prepared:

• Soldering iron.
• Solder, rosin.
• Third hand. A very handy device that will greatly facilitate the soldering of small parts.
• Half an hour of free time.

Important. There is a feature of connecting a transformer. Connect the wires as shown in the photo below.

Everything has been prepared, time has been allocated, which means that you can now safely start assembling this device.

I recorded the whole process in video, so you can watch and enjoy good music. By the way, if you like the video, do not forget to like it.

Agree, a cool toy that can even be used on the farm, so everyone interested and willing to practice soldering, I bought this set in this store.

Also, do not forget to like and repost the article. Thank you very much!