What if in an apartment swollen parquet

Choosing a floor covering, home owners often do not take into account the negative characteristics that have these materials.

For example, parquet, with all his good qualities too prone to various injuries. Most often this is reflected in the fact that parquet floors appear cracks or bulges. Cope with them can be alone.

The causes of blisters on the floor

We need to understand the reason why there was swelling of the parquet. In most cases, such a situation is due to the fact that the flooring is exposed to high humidity. For example, it may cause water leakage from the heating pipes. In the first place it is always necessary to eliminate the cause of the swelling on the floor.

To get rid of bloating, you should check whether there is high humidity at the moment sources. Accordingly, the pipe must be in good repair, and qualitatively ventilated room. Insufficient ventilation level once again lead to the appearance of blisters.

Change the flooring or not to change?

If the flooring is completely dried out, it is necessary to estimate how big the scale of damage. Sometimes when dry flooring comes in a relatively good state of repair it is not required. But there is not always.

If the swelling does not disappear, it is necessary to carry out the replacement of parquet blocks. Sometimes it is sufficient to replace only a single site, and in some cases it is necessary fully to shift the parquet floor.

Eliminating spoiled bars

Replacing a single site run fast enough. First of all, it is necessary to remove damaged parquet blocks.

To do this, simply divide the chisel and removed from nests. If you have previously used to secure the flooring adhesive interface, carefully degreased, otherwise the new material is difficult to glue.

Assembly and finishing of new parquet strips

After you need to choose the parquet strips of appropriate sizes and textures. Particularly find fault with the new color of the strips is not necessary, because the shade material is still able to change.

Having laid new parquet blocks formed in the slot, go to the floor sanding. Polishing is necessary to perform the entire flooring area, otherwise there will be noticeable differences in the quality of the wood. Thereafter, proceeds to Standard paint flooring.

channel RemontDom thanks for your attention. We wish you a great day and a quality repair.