A reliable way to seal the hole in the drywall: tips from a master

Plasterboard well-known and widely used building material. It is often used for interior decoration. With drywall, you can make any design of the room, align the walls and ceiling.

He is fine and easy to cut, but not strong enough. Therefore, the drywall can be easily damaged.

How to seal the hole in the drywall the size of 3 cm?

Do not try to patch up the hole in the filler material. She eventually just fall into gipsokatrona. Whether it is necessary to dismantle the damaged sheet of drywall? There is a clever way to avoid it.

In order to get rid of the problem, prepare:

- pencil serpyanka, screws,

- hot melt adhesive or sealant,

- putty

- a piece of drywall, spatula and a knife.

1. Mark out and cut into the wall where the hole is a square or a circle.

2. From a piece of drywall cut out a square or a circle the size.

3. Fasten with screws at the back side of the bar.

4. Screw one screw cut square.

5. Glue on the perimeter of the square serpyanku.

6. Apply filler for leveling the surface.

In the same way it is possible to close up the hole in the ceiling from plasterboard.

channel RemontDom He wants a quality repair. Thanks for subscribing and huskies!