Waste bin made of plastic bottles

How to make a garbage container in the country from waste material? Almost everyone collects plastic bottles. From them you can make a lot of useful things for the garden, home, summer cottage.

For example, make a warm bed from plastic bottles or drainage. A fairly strong rope can be cut from plastic.

Today we will tell you how to make a large trash can, which is useful in the country. Light tanks are obtained (convenient to move), which are not afraid of rain, hail, and other vagaries of the weather.

Such a tank is not suitable for heavy waste. There is also no need to throw burning matches, etc. into this tank.

Prepare the following:

• Several pieces of empty seam. containers of the same size,
• Knife, awl, pliers,
• Steel wire 3 mm. and 6 mm.

Peel the paper labels off the bottles. Make a hole in the center of the covers with a wire awl. Make the holes larger in the center of the bottom of the bottles in order to tightly insert the neck of the bottles.

It is necessary to collect the so-called columns from bottles. Cut the thin wire so that they are 30 cm greater than the height of the finished tank. We pass a thin wire through the holes in the bottle caps. We remind you that the neck of subsequent plastic bottles must be tightly attached to the hole in the bottom of the previous containers.

We collect the resulting sections. But first, let's make a wireframe. We need thick wire. You need to make 3 rings out of it for the top, middle and bottom of the trash can. You also need to cut off 3 pieces of 20 cm thick wire. greater than the tank height.

We attach the thin wire to the thick wire rings using pliers. If you have multi-colored bottles, you can alternate them to get horizontal or vertical stripes.

You can make such urns without a bottom or with a bottom. For the bottom, you can twist the wire with a mesh. A metal sheet, plywood (moisture resistant) or polycarbonate is quite suitable for the bottom.

How to make tubes from plastic bottles and what is it for?

Channel RepairDom: subscription. We will be grateful for the like!