The best way to trim tiles in tight spaces

Floor tile in the bathroom, hallway, kitchen or in the bathroom - is the best option. Another question: how to put the right tile in remote locations where a tile trim.

If you are planning a simple tiling, then you can start from anywhere: from the middle or from the corner. If you intend to lay the tile complex pattern, it should start with the center of the floor.

After laying the tiles on the floor as much as there is radical. Well if this is a simple clutch and the residue can be measured with a tape measure. But there are situations when it is difficult to do.

You can cut out templates newspapers. But this is not the best way. It is not accurately obtained, and need a lot of newspapers.

The best way to trim tiles

Trimmers need: yarn (which is not pulled) and a pencil. Tie a simple pencil any strong thread.

Consider the example of. So, you need to trim the tiles. To do this, you must find 4 points and mark them on the tile.

2 points (1 and 4 in the picture), you can find simple: continue to the edge of the tiles on the floor with a tape measure. We obtain, for example, 25 cm. This also add the seal and the clearance from the wall. Measure out 2 points on the tile (№ 1 and 4).

From the angle of tile on the floor putting a thread and pull up to the wall. On the tile we transfer this size and draw a semi-circular notch. From the second corner doing the same thing. We get the desired point. In this manner we do markup to another point (point number 2 and 3). Connect the dots and make trim tiles.

Channel RemontDom - zen.yandex.ru/remonts We wish you successful renovation! Subscription and huskies are welcome.