How to restore your favorite Phillips screwdriver

The screwdriver began to scroll when screwing in the screws, so repairs were outlined. Similarly exactly one year back already refurbished three bits for a screwdriverwhich I still use from time to time. Now it’s the turn of the screwdriver, which is 10 years old and it is pretty lickable. To restore a screwdriver, I do without a drill or other power tool, all by hand.

Can be used barbut took a grinding attachment with sandpaper and under right angle a cruciform tip, sharpened over time, slightly worn off to it. It took a couple of minutes.

Then it remained in turn to slightly correct the worn wings of the cross. I do this according to the bevel angle of the cross. The screwdriver is durable, chrome vanadium, and does not want to give in right away. On a bar, I think, it would have been faster, since it, unlike the nozzle, is hard.

I have been using this screwdriver for a long time even as a striker when installing a dowel of nails. I'm very used to it, so I decided to repair it.

After turning, the tip looks like a new one. It remains to check it on some self-tapping screw. By the way, before the restoration with a screwdriver, due to slippage, it was difficult to screw a 30 mm screw into the tree. But now everything is fine - it is going confidently. So the end is successful!

Evaluate the material andsubscribeper channel.

How to update a coffee table with your own hands

Alcohol from vodka for an antiseptic at home

How to sharpen a meat grinder knife. I remove the rust to the mirror

Almost anecdote. Returned home, but no wiring