Secrets of work with cyanoacrylate: 5 life hacking when working with super glue
Today some interesting tips from the house masters. Let's talk about how to make the job easier and faster.
1. If someone you often have to work with glue, then he knows how difficult it is clear cyanoacrylate glue, which falls on the surface. To clean the surface of the excess of adhesive required dimexide. This means you can buy in any pharmacy.
2. Another, no less helpful advice. Often, when dealing with many adhesive used needle from the syringe for applying a thin layer of adhesive. It is very convenient and the glue gets into all the small cracks.
But there is one drawback: After working in the needle glue hardens. To avoid this, a little warm up the needle with the help of conventional lighters. Then you can work on.
3. Often the glue gets on the skin. It often happens that the fingers are glued together. Question: How to remove the adhesive from the skin painlessly hands? Soak in alcohol or soak your fingers in acetone, a cotton pad and wipe them. A few minutes (5 to 10 minutes) the adhesive softens and the skin of hands will be easier to remove residues cyanoacrylate.
4. If the glue gets on the fabric, it will be harder to remove. You can use acetone. However, acetone can damage the tissue structure. Therefore, to check in advance the action of acetone in a small area of tissue.
When working with the glue must not use x / cotton gloves. You can get burned.
To cause cyanoacrylate to the surface, you can use anything you like, but other than wool, paper and fabric. For applying adhesive to the surface of suitable plastic or metal stick.
5. Some argue that soda and cyanoacrylate lead to a durable plastic compound. But there is a strong glue. Epoxy adhesive works better, but much more slowly solidifies (need about 45 minutes).