How to fix the plug in the wall loose: a secret way the old masters

Many are faced with the repair problems. Brick walls sometimes crumble, concrete is not always strong. Problems arise in the walls of loose slag, sand-cement plaster and others.

How to fix the plug in the wall of such a problem? How to hang a shelf, curtains, cabinets without any problems? Let us examine this question.

Some will say this: "What's so hard about that? Backfill the hole with cement and mount further. " Practice has shown that it does not help. cement solution may fall, crumble.

If the wall is crumbling is not strong, you can try to wrap cellophane anchor segment (the package from the store) or tape. Make it so that the plug was inserted into the hole with difficulty. Winding is made in the course of the thread.

You can try to wrap the anchor plaster bandages. But initially wet it and then insert into the hole.

If the anchor is hanging in the hole, then do so. A vacuum cleaner to remove any dust from the hole. Primed with hole acrylic primer deep penetration. Wait until dry and completely fill the hole with liquid nails. Then insert a plug, wait about a day when the adhesive sets and continue the installation on.

Popular chemical anchor can help today.

To loose the walls in the Khrushchev, stalinkas better use of chemical anchor it in a tube. Only minus - expensive.

reliable fastening secret

How to fix the heavy furniture to the wall anchor loose nail? For walls with a thick layer of plaster and other troubled walls use long dowel-nails. But they can not cope with the task. Therefore, we must do as follows.

Insert the dowel normal match (inside the head). And then trying to drive a nail with a hammer. If a concrete or brick wall is very loose, then insert one or more matches in a hole in the wall itself.

channel RemontDom: Please subscribe to thank and huskies. Have a nice day!