Useful content

Blowing of plastic windows: how to easily fix the problem on their own

click fraud protection

Then came the cold, all in the snow, cold weather does not back down. Some notice as blowing, carries cold by plastic windows. If the windows are not installed for a long time and there is a guarantee, it is best to call the company that did the installation. But you can solve the problem yourself.

adjustment

To avoid the barrel of a window, you need to make the correct setting of window accessories. Check closes (opens) whether the window easily and smoothly? It should not hang anything and casement must be firmly pressed against the frame.

If glazed shines through the perimeter, the window stands in summer mode. It is necessary to open the flap. They have a so-called pin. You need to twist them clockwise until it stops. This is the easiest.

Form of pins are different. If this setting does not help, and the other pin, then try this simple method. When the label is in the end position, and you can not pull over, do so. Wrap electrical tape on the roller.

Picture: Youtube, author of Horrible blogger
Picture: Youtube, author of Horrible blogger
instagram viewer

Blowing between the sill and frame

This is the most common problem. The reason for the destruction of an assembly seam. Mounting foam used in the installation of windows. It persists for about 6-8 years with proper insulation.

Recommend carefully removed from the outside room (facing the street) low tide. Unscrupulous installers can save on the mounting foam. Clean the area of ​​long-standing foam and dirt. Then blow out the new construction foam. After that just will not draft between the frame and sill.

Image: postroika.biz
Image: postroika.biz

If this is difficult for you, then try to eliminate blowing this simple way. Take a walk through the cracks transparent silicone sealant. Remember, the sealant must be frost-proof.

Blowing where the loop

If the cold is a loop, you can easily adjust them. You need a key star. Remove the plastic protection and see the place where you want to adjust. The closer to the window, the more grip.

compactor

Along the perimeter of the windows have a gum, which over time begins to shrivel up and stretch. It must be replaced to avoid the barrel. It's simple to do by yourself. If you want to further seal lasts longer grease silicone gum.

channel RemontDom - please Like and subscribe. Thank you so much!
The décor of the interior "for pennies" or how to bring flavor to your home. says designer

The décor of the interior "for pennies" or how to bring flavor to your home. says designer

Good afternoon dear friends!You want to bring bright, individual touch to your interiorBut you do...

Read More

How I always deacidify the soil on the site

How I always deacidify the soil on the site

It's no secret that crops cannot grow in acidic soil. In this regard, the question arises of how ...

Read More

How to connect the LED to 220 Volt

How to connect the LED to 220 Volt

In most cases, the LEDs are powered by 220 volts via drivers (e.g., a conventional LED lamp), but...

Read More

Instagram story viewer