Several ways to wash down the door frame, which are most often used for DIY installation.

When installing an interior door, one of the most critical stages of work is door frame installation.

The work of the door block as a whole largely depends on the correctness of its implementation.

At the same time, an important role in this process is played by washing down the door frame.

After all, to carry out the correct docking of individual elements of the box without a smooth and beautiful wash down is almost impossible.

Most often used during installation several ways to wash down the door frame. They will be discussed below.

Let's start with the easiest way, which does not require special skills and tools.

Even a beginner can do it, knowing the technology of the process.

I washed down the door frame at a right angle.

We place the planks of the future door frame perpendicular to each other, as shown in the photo above, and apply markings with a pencil at the junction.

Then, using a hacksaw for wood or a miter saw, we wash down the applied markings to the bottom shelf of the bar.

Then, using a chisel and a hammer "Select" the extra part from the end of the porch.

We align the resulting groove to ensure high-quality joining.

We assemble and fix the door frame strips with self-tapping screws on each side.

The second method of joining the door frame strips is no longer possible without a special tool.

He washed down the door frame at an angle of 45 °.

To make a washed down door frame at an angle of 45 degrees, you need a miter saw.

It will not be difficult to perform a wash down with its help, you just need to set the desired angle on the bed and make cuts.

But this power tool is not always at hand.

Then the tool that our grandfathers used will come to help - carpentry miter box.

Performing cuts with a hacksaw using this tool is not so fast, but quite effective.