Junk circular saw template. And you don't need to tag

I decided to make a template for my saw so that I could trim boards and bars at 90 °, but I didn't want to aim with the disc. I saw how famously the guys use Svenson's corner, let me think I'll make it easier.

How did

The neighbors gave me their old furniture, which they used for the material, they really regret it, they thought it would work as intended, but where to use such junk. I took it, disassembled the door, and cut it off with a triangle, got angles 90 and 45, 45 for marking, and I will cut along a straight line.

I fixed a bar on the side to rest on the screws. In principle, it could be used, made a control cut, everything is clear, the angle is maintained. But I don't like the fact that I have to aim with the saw blade at the mark, so I screwed on a sheet of plywood from below, and cut it with a tool.

Now, if you put the plywood at the mark, then you do not need to mark, the cut will definitely go along its edge. I checked, sawed off the marked block, everything is accurate, and the angle is maintained. By the same principle, he made a guide rail, which he used to manufacture his device. I know I haven't done anything outstanding, but it is very convenient, and speeds up the work, I hope it will be useful to someone. Soon we will have to close the roof, I think that homemade products will come in handy there, in the process of work, maybe more, whatever I can think of.

Subscribe, share, like, new story soon.