How to properly prepare and paint a professional pipe for painting: useful tips

Any metal structure, whether it be a fence or a canopy, will cease to please in six months, if rust spots appear on the fresh paint. This is a clear sign that you will have to repaint. In order not to waste energy and money in vain, use the advice on preparing the profiled pipe for painting and directly with the recommendations for the painting itself. All of the following applies to any metal surface. At the end you will find a small interesting test.

How to prepare a metal surface for painting

First, according to the rules, you need to clean the metal from rust - sand it thoroughly. Skins from the word - thoroughly. The procedure is mandatory, since at the factory, when rolling metal, rust and oil are rolled into it under high pressure. The oil will not allow the paint to lie on the surface properly, and the rolled-in rust will come out after a short time.

Rust is perfectly removed with a grinder with a disc brush. Which attachment to choose for this? The answer will be in the test!

It is best to lay out the professional pipe in rows on a flat surface and carry out processing before installation - this is convenient, since an evenly folded profile is faster and more efficient to clean with a grinder. If the professional pipe is already installed as fence posts, you will have to work hard with a sandpaper. Do not forget to beat off the slag from the welds, otherwise it will rust!

Degreasing is the most important point!

A sanded and shiny profile must be degreased. This is done with a rag and a regular degreaser: that's what it's called. There is a small life hack here - do not spare liquids. The degreaser not only neutralizes oils and fats on the metal, but also washes away rust dust that has eaten into the metal surface after sanding.

How to paint a professional pipe

It is best to paint with a short-haired roller. By no means paralon! When painting, be sure to use a bath and wring out the roller. The roller should be semi-dry to avoid dripping. It is best to apply two coats of paint. If you have a spray gun and the skills to work with it, the painting will accelerate, and the surface will take on a more attractive appearance!

Take a little test!

How do you paint metal surfaces? Write in the comments!

Friends, there are already more than 30 thousand of us!Subscribe to our channel, like, share the publication -we are workingso that you receive only useful and relevant information!

Read also:

• What kind of pool can be made in the country, if not limited to finances? Photo collection.
• From July 1, "smart" meters will be installed in the homes of Russians.

Watch the video - Review of the problems of frame and stone houses.