Summer gazebo from an old satellite dish - the process of making an unusual gazebo for a summer residence

Sooner or later, each of us is faced with the problem of unnecessary things. Today we will talk about an unusable, old satellite dish (dish).

How to give a second life to an old thing and transform a site? It's simple - to use it to make a recreation area, where the plate will serve as a roof for the gazebo. This is one of the things you can do with a plate. Some people make a bird drinker, a mini-pond. It turns out very nice.

The design of the gazebo is so simple that almost every man will cope with its erection.

This will require a variety of materials.

Gazebo frame: 4 pipes of the same length, 4 metal rods, the length of which will depend on the distance between the pipes, the plate itself, 4 corners to fasten the roof with the pipes with screws.

Table: wooden post, round chipboard board.

Chairs: Chipboard seats, metal rods approximately 60 cm long.

Tools: welding machine, screwdriver, screws, grinder, hammer, shovel. Paint and brushes.

Work process

The first step is to cut 4 pipes of the same length, on one side making a hole for a self-tapping screw, and dig them into the ground at the same distance from each other.

After, it is necessary to weld metal rods with a welding machine, having previously made markings on the pipes. Having hammered the pipes into the ground a little, it turns out that the rods rest against it, and we achieve this result.

Having painted the roof with acrylic paint, install it, connecting it with the corners to the pipes, using self-tapping screws.

Weld the rods for the seats, attach the chipboard seats with screws. Dig a hole for the post under the table and connect the chipboard tabletop to it with self-tapping screws.

Instead of metal pipes and rods, wooden structures can be used, then tools such as a welding machine and a grinder are not needed.

The gazebo is ready! Left just paint.

Channel Repair House: subscription.