Why am I happy with the purchase of an electric hob. What are her pros and cons

I have a "Gorenje" panel. Why this particular brand of technology? Because, a reliable Slovenian manufacturer and, frankly, "Gorenje" has the most optimal quality / price ratio. Judge for yourself. At a cost of 22,000, the hob has 4 burners that heat up very quickly.

At the right rear, the heating zone increases to the size of a rooster.

The left front has 2 heating zones - small and large.

2 more burners are the same, about a 3-liter saucepan.

9 temperature modes.

On 9ke, the panel can work for 1.5 hours, but this is not required. I even fry pancakes on 8k, otherwise they burn. I cook porridge on 3k. The residual heat indicator flashes until the hotplate cools down. It is important that no one gets burned.

Delayed start is a very handy thing. Clock, pause.

Caring for the hob

Glass ceramics can be washed very easily, with suitable means, there are a lot of them now. To wipe the panel, I bought a special rag, it does not leave streaks on the glass. The stove beeps if water gets on it, even when it is turned off. In operating mode, it will turn off immediately and will not work until you remove the water.

Of course, during operation, amalgam spots began to appear on the zones of the burners, due to pans with an admixture of aluminum. But they are completely removed with a cleaning agent. And old stains can also be removed by polishing with Goya's paste (my husband read it on the net).

Under no circumstances should sugar get on the burners. Sticks to death. I got it. I barely scratched it off with some kind of Chinese "Cinderella" while, of course, a little scratched.

Connection and "service"

Since the thing is powerful, it does not have any sockets. We connected it with a separate wire immediately to the machine. After a day of operation, the right burners did not heat up. The panel was under warranty, of course, I turned to the service, they told me - it's almost 300 km to you, we don't go that far, take it yourself. In general, my husband disassembled, it turned out that some kind of jumper was loosely fixed. She then burned down. It was replaced by pah-pah.

Convenient highlight of this model

Not an unimportant detail yet. My panel has a metal edging. Most often, judging by the reviews, the edges of the panels break off (the cover fell, for example). This may not be entirely critical, but, you must agree, not aesthetically pleasing. Metal edging protects the edges from such damage.

In my purchase, I see only advantages. Who else has this brand of stove? Share your impressions and experiences.