Useful content

Electricity consumption has increased, how to find and eliminate the cause

click fraud protection

Hello dear guests and subscribers of my channel. Sometimes a situation arises when a completely familiar level of power consumption suddenly changes sharply upward. And okay, if this growth is associated with seasonal fluctuations (winter - heaters, summer - air conditioners).

However, an increase in consumption is sometimes formed for no apparent reason, let's consider the most basic reasons for such an increase in costs.

Important. All electrical work must be carried out by a specialist. If you do not have special knowledge and skills in electricity, then call a specialist. Remember, electricity is unforgiving. Take care of yourself and your loved ones.

Illiterate electrical connection

So, a very common reason for an increase in electricity consumption is the incorrect connection of the meter. Let's say you had an old metering device, and the time has come for its replacement. The service company replaced it successfully, and you notice that the power consumption has increased several times.

instagram viewer

One of the reasons is the connection of the neutral wire from the meter to your apartment through the switchboard housing. Remember! The zero wire leaving the meter should go directly to your apartment, so no breaks should be allowed.

Neighbors steal your light

Another extremely common reason for unjustified cost overruns is the banal theft of electricity by negligent neighbors. If you have turned off all electrical appliances and turned off the light in your apartment, and the meter is still blowing electricity, then it is possible that you have connected to your network.

In order to find out this, you need to inspect the switchboard and all adjacent sockets in your apartment. If you find a "left" connection, call the representative of the power supply organization. Do not under any circumstances arrange lynching. Let the specialists do it.

But these are not all reasons, let's consider them further.

The metering device itself is faulty

Only what does not break down. Therefore, another reason for the excessive consumption of electricity is the failure of the meter. There is such a thing as "self-propelled electrical appliance". With such a breakdown, the meter will read off kilowatts even without a load.

Large leakage current

Such a waste of electricity is associated with an extremely unpleasant reason - bad or very old electrical wiring. If the insulating material of the cores is faulty, a leakage current may occur, which will be recorded by the meter as a load. Only a specialist with a special device will help to identify this type of malfunction, and it will only be possible to fix it by replacing the old / faulty wiring with a new one.

Eliminate the cause of excessive consumption of electricity

So, now let's look at the algorithm of actions with a strong excessive consumption of electricity:

  1. We turn off the electricity completely and check if the electricity meter is shaking. If not, everything is in order, and your consumption has simply increased (possibly seasonal or banal irrational use). If the counter shakes, then proceed to the next points.
  2. We check the connection diagram (on our own or with a specialist), if it is normal, we move on.
  3. We check the switchboard and all adjacent sockets for the "left" connection to your wiring. Found this out? We call specialists and write the necessary statements. Let the relevant authorities deal with freebie lovers. We do not arrange lynching. No left connections, let's move on.
  4. We check the metering device for self-propelled by calling specialists. If we have identified a self-propelled gun, we change the meter, if everything is in order with it, we go further.
  5. We call a specialist and check the insulation of the wiring for the presence of a leakage current. Revealed such, we change either the damaged area, or the wiring completely.

This is how the algorithm of actions looks like. Once again, I want to remind you if you do not have special knowledge and skills, then entrust all work with electricity to professionals.

If you liked the material, then we subscribe so as not to miss new releases and evaluate the material. Thank you for your attention!

The result of using cheap foam glue. I decided to save 500 rubles, and got a crooked masonry.

The result of using cheap foam glue. I decided to save 500 rubles, and got a crooked masonry.

Saving + poor experience is an explosive mixture that, most often, leads to poor results. Another...

Read More

A proven way to make an anvil from a rail

A proven way to make an anvil from a rail

Hello everyone! I continue the series of articles dedicated to the construction ingenuity of a si...

Read More

From the old log house in the Fisherman's Chalet. Part one

From the old log house in the Fisherman's Chalet. Part one

Personal experience of reconstruction of a classic five-wall with a minimal budgetIt is believed ...

Read More

Instagram story viewer