Useful content

Why does the hair dryer overheat and smoke?

click fraud protection
Photo 1.
Photo 1.

Not so long ago I noticed that while drying my hair, my wife turns off the hair dryer, sits for a while and waits for something, and since the hair dryer is a little over a year old, it looked suspicious. It turned out that hairdryer Rowenta after a couple of minutes it became very hot, even an unpleasant smell of burning and light smoke appeared. Since I already have a little experience in repairing hair dryers, I undertook to deal with this case as well.

I even managed to disassemble the product into bones, although this was not necessary. I thought that, just like in some old-style hair dryers, hair and dust have crammed inside around the incandescent spiral, interfere with the air flow and now burns.
Photo 2. Wasted labor.
Photo 2. Wasted labor.

When he was convinced that it was almost clean inside, he began to look for another reason and she was found. It turned out that everything could not be easier, but due to lack of experience it did not come right away.

The hair dryer took about 30-40 minutes to assemble, and it was much more difficult to do it than to disassemble it. So keep in mind that you need to be prepared for the complexities of assembling this model in advance. In addition, there are also screws with triangular slots, which can not be unscrewed with any screwdriver.
instagram viewer
Photo 3.

All you had to do was take a hairdryer and in two clicks on the back of it, remove and clean the mesh, which coked up with small debris. Since the air went inside poorly, the hair dryer did not cool normally and worked with a load, and the smell appeared from overheated plastic and the smallest particles of dust that seeped through the filter and settled inside.

Read more:

We connect PVC pipe cuttings in 2 minutes. Tools are optional. I glued the tiles according to the granny's project. The idea was not even discussed. I threw out the corrugation under the sink, put the pipe 50 mm

In general, on the second attempt I removed the mesh, cleaned it and defeated the problem in 3 minutes. The hair dryer mesh was first cleaned with a hard brush, then washed under the tap. This is the case when, due to ignorance of elementary things, I had to practice my hands a little.

Photo 4.

Personal experience is the most valuable, because it is unforgettable, although it can be sad and even incorrigible. But it's good that in this case everything is simpler. Share your curiosities in life, it's both interesting and instructive.

Read other helpful materials andsubscribeper channel.

What fittings for the tank are not worth buying
Useful coffee bag ideas
How to make an inexpensive and durable pallet bed
New building material: reinforced foam concrete or fiber foam concrete block with cladding

New building material: reinforced foam concrete or fiber foam concrete block with cladding

Many people know the building block made of aerated concrete - foam concrete. Unfortunately, it i...

Read More

Master, we urgently need renovation and new furniture! Compilation of four-legged dismantlers

Master, we urgently need renovation and new furniture! Compilation of four-legged dismantlers

Leaving dogs alone at home is dangerous. After their unbridled fun, gnawed furniture and exposed ...

Read More

DIY folding toolbox. Convenient design has not yet been invented

DIY folding toolbox. Convenient design has not yet been invented

Probably everyone has a toolbox. The most common option is plastic. They have a small cost, but t...

Read More

Instagram story viewer