What I recommend to put on the bottom of the pot so that indoor plants bloom better

There is no home plant that does not use drainage. Even those plants that need to be approached with caution require transplanting and filling the bottom of the pot with a drainage agent.

Therefore, I recommend placing drainage at the bottom of the pot, this will speed up the growth of indoor plants.

In order to choose the right drainage, you must first of all turn your attention not to the material, but to the height of the protective layer.

What is drainage, and why is it needed

Each housewife thinks about: why do we need drainage for indoor plants? The answer is simple: drainage compacts the soil system well, makes it softer and sufficiently elastic.

Drainage Is a system designed for soil drainage, which keeps moisture comfortable for the plant well. These are the usual coarse grains that are sprinkled on the bottom of the pot.

The drainage agent will ensure good water drainage and the room air will be waterproof. Air exchange of granular grains will help the root system and the flower itself breathe well.

5 options to make drainage for fertilizing indoor plants yourself

1. For indoor efficient indoor plant growth, I periodically change the soil, and for this I use drainage. Each time the plant needs to create an absolutely clean soil layer.

Before adding granular grains or stone chips, expanded clay for laying a protective layer of the pot - you need to rinse everything thoroughly, then dry it, and then use these substances. That is to say, it is necessary for the drainage to undergo primary processing of the material.

2. It is necessary to select the height of the drainage individually for each house plant. Now I'll tell you: what are the layers of styling: the first layer, it is also called prozhark, fits from one to three centimeters, medium - five centimeters, high - here the protective layer is laid with a height of five or more centimeters.

3. It is necessary to correctly form the height of the drainage layer and the hole. It depends on the pot or planter itself. If there is at least one hole in it, then I recommend raising the drainage to a height of up to three centimeters.

If the drainage grains are very large, then the protective layer can be laid one centimeter high.

4. The most important task is to make sure that all tools and devices are clean, well washed and processed.

And then lay a drainage layer on the bottom of the pot. Drainage must be sprinkled on the bottom before planting the plant.

To keep it environmentally friendly and dry. And also plant pots must also be pre-processed.

5. In pre-prepared pots, it is necessary to fill the bottom with a layer of coarse-grained filler immediately and adjusting its height.

Advice! In order for the drainage to decompose properly and over the entire volume of the surface, the pot must be tapped on the sides and shaken periodically.

You must fully level the protective drainage layer, level the sand and soil. After this process, you can confidently plant or transplant a home plant.

I always recommend that flower hostesses put drainage on the bottom of the pot. It will facilitate the growth of a houseplant well, and will bloom well due to drainage fillers.