Level 80 screwdriver: how to make a universal tool out of Shurik

A convenient thing is a screwdriver: it will help to fasten the shelf, and on the roof it will tighten several dozen roofing screws (until the battery runs out).

But few people know that an ordinary "shura" can be modified with the help of simple devices. Make him, so to speak, a universal soldier. I tell and show how.

First trick will help you drill a hole or screw a self-tapping screw strictly at an angle of 90 degrees to the surface. To do this, we squeeze the Lego parts out of the child, sculpt the simplest volumetric square from them, and apply the drill to its inner part:

Do you know? Let's go further!

Second trick a little more obvious and will help you drill a hole to the ideal depth: not an inch more or less. We just make a mark from electrical tape (or cable tie):

I will not torment for a long time and I will pass to the third trick.

It happens that you need to screw a threaded hook into a wooden wall or door. In this case, we arm ourselves with a screwdriver, an old key and the actual hook, as shown in the photo. Success is guaranteed:

Do you think you can't caulk a house with a drill or screwdriver? You are deeply mistaken, my friends. Watch the video:

Your opinion is highly appreciated!

Write comments, otherwise I will stop sharing tricks on my channel!

#screwdriver#garden and cottage#drill#perforator