Without a special education, I decided to independently conduct an electrician in my house: what came out of my idea
I started the installation of electrics in the house at the beginning of construction work, after the completion of the construction of the brick box of the house and the installation of the roof structure. Through all the rooms, corridors, technical rooms, I extended the cables, in parallel scattering them into groups.
I sorted the cables depending on the expected load on them. Due to the fact that a huge number of wires are included in the shield, so as not to get confused, I signed them (on the insulating layer made marks with a marker), and also connected to each other in a tight press, using electrical tape, wire.
In the corridor, near the front door, I decided to install an electric board. For him, with the help of a grinder, I cut a rectangular opening in a brick wall. After that, I installed a plastic box in it, fixing it with alabaster.
I began to put all the cables into the dashboard, carried out the switching in parallel, installed the machines. In my case, I decided to divide the electricity into zones. For example, in the kitchen and dining room there will be a large accumulation of household appliances. To prevent overloading, I connected the most powerful devices to separate machines:
Refrigerator, freezer;
· oven;
· A block of outlets for a microwave, kettle and other devices.
In my house, electricity has three phases, so I installed an introductory machine with 3 connected buttons. Without fail, I installed an RCD, which prevents a short circuit.
I also installed an OPS in the shield, since the presence of arresters helps in a thunderstorm to minimize the risks of damage to household appliances plugged into the sockets. At the final stage, I will hide all the cables that now go to the shield along the gates in the walls, covering them with alabaster.