Useful solutions for suburban transport owners

Ideas for improving the lives and living conditions always appear in the process of work and creativity. Tired pull of gravity dragging - and invented the wheel. And then - the chariot, cart, bicycle, internal combustion engine... Country life is hard today to imagine without the vehicle. Motorists running a huge industry and it would seem, you can purchase any option, just pay. But often have to pay too much, because inventors and craftsmen among truckers, motorists are not translated. But this is simply interesting - do the right thing with their own hands.

We offer you a small selection of "transport" ideas and solutions successfully implemented FORUMHOUSE users. Go!

Car trunks to the great variety of the market, that's just cheap many are not satisfied with the quality and functionality, and expensive - it is clear... The solution is simple - to make the trunk satisfying your needs, their own hands. Here's how it turned out the user

max68.2011. Sliding telescopic structure allows, if necessary to transport loads marker: slate sheets 3x1.5 m, six-meter board, beam, etc. proftruby

IN design used square pipe 20x20 mm and 25x25 mm, minor trimming from 40h25 mm pipes and many furniture M6 bolts and nuts-Bashkov to quickly change the size of the boot.

Minimum boot length - 175 cm, and can push forward another meter and a meter backwards.

max68.2011 (participant FORUMHOUSE):

At the transverse bases trunk minimum width of 125 cm (made specifically for the standard sheet material 122 cm), and the maximum - 205 cm. When vezosh sheets, the width is put in the size, length can be back and forth on two feet add. But be sure to press the sheets are at least a couple of bars of 50x50 mm: Sailing is very big.

But the user maximace for your Renault Sandero Stepway donetrunk of 32mm board, fastening on the car roof rails.

Maximace (participant FORUMHOUSE):

It was when no svarochnika I did not have, but there was a need for a roof rack. Well, the view that there was decent. I use the material that was on hand.

In particular, the fixture is made for transportation of a bicycle. And when it took to bring the steel sheet, - the frame was made to transport the flat design is longer and wider luggage compartment crossbars.

But woodCertainly not the most suitable material for the trunk, from driving on potholes may crack, and the load will be on the roof. It is therefore important not to overload the structure and, of course, not the "drive" at high speed.

Car needs a house, a garage, and the garage - gates. Conventional hinged garage doors have two heavy shutters that open outwards. It gives a lot of inconvenience, especially in winter, when their sweeps snow. Therefore, the theme of design and installation of single-lift gates so popular in FORUMHOUSE users. Here are dozens of patterns and different design options - 
Spring, with counterweight, electric, etc.

So, forumchanin igr5591 the rise of the gate leaf by means of levers and rollers, rolled back along the guide rails.

Igr5591 (participant FORUMHOUSE):

Gates 3h2,5 meters, are the fifth year, during that time "overgrown" with electric remote control.

Ochumelkin its version of the gate gathered for two days. Its design is provided in the middle of the leaf is also the gate: you can pick up leaf, you can go through the gate.

Ochumelkin (participant FORUMHOUSE):

By carefully adjusting springs flap hangs in any position. Material standard: profile, angles, channel bars scrap.

Another popular among motorists, truckers theme - the improvement of the trailer. Caravan enables the transport of solid load weights and dimensions, but you first need to download it and then unload... Members Active Andr3 I found a way out: on a regular trailer he mounted crane lift. It turned out, "he ship - I drive myself."

Andr3 (participant FORUMHOUSE):

Body trailer Length 2.30, width 1.52. I took to building materials were no problems. Lift at 500 kg, but I then redo another - to extend the boom on two feet and make outriggers side. I have done as a multi-purpose. I managed to move out of the garage on the sofa cottage, Extracted from two landings hefty birch wood trunk to pull out of the ditch four wheels. And all of this alone.

Another topic which greatly interested the owners of caravans - increase the base of the trailer for the possibility of long loads. Plenty of room for experimentation here is limited to the requirements of safety and traffic regulations: register reconstructed the trailer in the traffic police so complicated that it is almost impossible. However, this conventional wisdom denies the user FORUMHOUSE Victor-. His improved light trailer for carrying long materials not only meet all the needs of the owner in the transport of goods, but also, though not without difficulty, was "legalized" in the traffic police.

Victor (party FORUMHOUSE):

it was very difficult to register a change in the traffic police vehicle design to people with "sticks" is not clinging on the road. But now more polkubometra selected boards, half a ton of metal acquire in passing, as a loaf of bread!

Body trailer length of 2.45 meters, a total length - 93 cm 4 m. From behind the trailer base load acts exactly 2 meters. According to the SDA, the size limit is oversize, which allows its transportation route without the consent of the traffic police. Therefore, for the alteration does not fit every trailer and having a sufficient length. front and rear cargo covered slings. Parameters dimension stop latch load calculated from the weight and dimensions of wet timber and trailer payload capacity (500 kg.).

Alas, summer residents, for whom the car is still a luxury, not a means of transportation, we are not enough. But they did not lose heart and find ways to carry and load, and a favorite budgetary means. User igor3For example, designed for their needs cargo tricycle. The basis was taken old bicycle "Ukraine".

All the work was done without turning operations manually by using electric welding and grinder and scrap materials. Model turnedAccording to the designer, it is very practical, not expensive to repair, easy to operate and has become an indispensable tool in the building site.

Igor3 (participant FORUMHOUSE):

The drive chain back pedals on one wheel. The brakes on the rear wheel, plus front brush on the rim. Sinkers - 125 kg (five sacks of cement) quietly pedaled. The generator body is also placed at 2.5 KV, a set of tools with the wire and water bottle 7 liters.

Other owners bezmotronyh means of transport are not far behind - collect cargo trailers or remodel purchased for their bikes. Gost1083397 designed several variants of three-wheeled "velotachek" front-loading cargo. Moreover, it is possible not only to carry cargo in one embodiment, but also little helpers passengers!

For information on how to turn the wheel scooter "ant" and a mini-tractor truck, read this theme. Here - discussion of options for improving automobile trailers. To learn how to easily and inexpensively automate swinging garage gate, tells This Video.

Discuss the article and read other materials devoted to country life you can on the websiteFORUMHOUSE.

Subscribe to the channel so as not to miss the next release!