Useful content

How to quickly and efficiently fill the seams on a limestone walkway: construction trick

click fraud protection

A limestone path is one of the best solutions for landscaping. Natural stone is strong, beautiful, durable. But there is also one obvious drawback of such a coating - large and often uneven seams, which cause some discomfort. How and how to quickly fill these seams - read on.

How to quickly and efficiently fill the seams on a limestone walkway: construction trick

Traditional methods of grouting

Usually, the joints between flagstones are rubbed in the same way as on a path made of paving slabs or paving stones. It happens as follows: a dry sand-cement mixture is placed in the seams and filled with water.

For large joints, such as a flagstone walkway, a 1: 3 mix of cement and granite screening can be used. Then, using a brush, the dry mixture is rubbed into the seams and also filled with water.

Some people prefer to seal the joints with masonry mortar. But this is a long and tedious process. We will tell you how to fill the joints between natural chipped stone tiles faster and better.

Alternative way

Seams can be filled with cement-sand mortar. To do this, you need to mix one part of cement with three parts of sand and dilute it all with water to a liquid consistency. The solution must be very pliable. To improve this property, you can add a little dishwashing detergent - two or three drops per bucket of solution are enough.

instagram viewer

Next, using a regular watering can, an old teapot or a bucket with a spout, you need to carefully fill in the seams between the flagstones. Such work is best done in the evening or in cloudy weather. This is necessary so that the seams do not dry out, but gain strength (concrete doesn't dry - it ripens!). The path can be covered with cellophane film for several days, and then watered with water for a week.

The publication uses photos from open sources

This method is less labor intensive, quality and relatively high speed of work. Another advantage of pouring joints: with a large volume, you can divide the work into stages and carry it out at different times.

How do you rub the seams on the tracks? Write in the comments!

Friends, there are already more than 70 thousand of us! Like, subscribe to the channel, share the publication - we are working so that you receive useful and relevant information!

Read also:

  • The future has already arrived! A selection of dacha construction humor.
  • TOP 8 most unusual hammers: photo selection and description.

Watch the video - 10 questions about composite shingles: price, installation, environmental friendliness and more.

How to feed peonies in spring in April-May for lush flowering

How to feed peonies in spring in April-May for lush flowering

Peonies are one of my favorite flowers. Therefore, I begin to care for them as soon as the first ...

Read More

An unusual birdhouse made of boards and a coffee can

An unusual birdhouse made of boards and a coffee can

Greetings to the homemade comrades and others who are quarantined idle. If you are already sittin...

Read More

Decorative chaise for storing firewood

Decorative chaise for storing firewood

It is good when the suburban area is sown with beautiful green grass, and even better when there ...

Read More

Instagram story viewer