How to hide the head of the screw and keep the wood pattern: the way under varnish
Often, the entire type of wooden product, assembled on screws or self-tapping screws, is spoiled by the hats. It is good if the fasteners are screwed in evenly and symmetrically - in this case they do not cut the eyes much. And if it is crooked, then any furniture automatically turns into a set of boards. How to make hardware hats invisible - read on.
Required tools and materials
The method is intended for boards and bars that will be varnished. It is in this case that it is important to preserve the wood pattern so that the attachment point does not stand out.
To mask the fasteners you will need:
- hammer and chisel;
- screwdriver / drill, wood drills, countersink;
- PVA glue or any other specialized wood glue;
- clamp or hold-down device;
- sandpaper.
What should be done
In the place where the screw will be located, it is necessary to remove with a chisel a small strip of wood with a thickness of about 2 mm, width across the thickness of the chisel, no more than 30 mm long. One edge of this strip should remain integral with the wood surface.
Next, you need to bend the strip, drill and countersink the hole, screw in the screw. The next step is to grease the strip from the side of the board and the groove with glue, and press. This can be done in any convenient way: with a clamp or put a burden. It is better to put a small board on top of the place to be glued, and then provide the clamping force.
When the glue dries, all that remains is to hide the unevenness with sandpaper and the surface can be varnished. Using this method will help to visually preserve the integrity of the tree pattern and hide the fastener caps as carefully as possible.
What methods do you use to mask the heads of screws and screws? Write in the comments.
Friends, there are already 99 thousand of us! Like, subscribe to the channel, share the publication - we are workingso that you receive useful and relevant information!
Read also:
- The recipe for the fastest marinade: the kebab can be fried in 25 minutes!
- Do Americans wear shoes around the house after their "clean" streets? We answer the question.
Watch the video - A two-storey house made of profiled timber: how to make a dream come true for 4,500,000?