The ceiling in the kitchen: the best finish of PVC panels. secrets of the finish

In the kitchen are always differences of temperatures from - for cooking. When the question comes to what to do in the kitchen ceiling, think about what material to choose. I would like to save, the process does not take a lot of time, and subsequently finishing last a long time.

Masters recommend plastic panels for the ceiling in the kitchen. In this article we describe in detail what the panel to select the installation process and all the advantages over other finishes.

The main advantage - 100% humidity panels. It does not form mold and fungus. Easy and simple material during installation. No need to pre-align the ceiling. Low cost in comparison with the stretch ceiling and other trim. You can not put recessed lighting. Plastic simple enough to clean out the accumulated fat.

Ceiling can not lower 10 cm. to embed fixtures. It can be built anywhere in the chandelier the ceiling after finishing. Chandelier in the kitchen is better to do with turning lights.

Crate to the ceiling can be mounted directly on the slab. Made from bar 2 centimeters thick. or from standard profiles, which are used for drywall.

If the ceiling is drywall, you can paste without battens. Only the pre-primed surface. Fasten with screws can presshayboy.

Pre-drill holes in the wooden bars drill. Make holes through each 60 cm.

Then the bar is applied to the ceiling and nasverlivayutsya openings in the ceiling. Suitable for fixing anchor - nails 6h60 mm. Wooden bars between the ceiling distance should not be more than 50 cm.

Mounting batten ready. Now you need to make the installation of wall starting profile. Prepare staple gun for this operation (brackets 6 mm.).

We fix the starting profile plastic stapler on a piece of wood on the perimeter, but except for one wall. It's far wall of windows.

We begin with the installation of the window. Fastening of panels to make the bars with screws. Measure the distance from wall to wall, cut the panel smaller than this size is 1 cm. Cut the panel hacksaw or knife.

The last panel can be mounted on the liquid nails with the last profile. Apply the adhesive to stick and glue panel profile.

channel RemontDom: Please click on the Like and thank all of you for subscribing! We wish you all the best and quality repairs!