Forget about grinder flap discs. There is a disc that removes paint and rust in an instant

The grinder (angle grinder) is a versatile tool that is used for cleaning, cutting, grinding various materials. There are different attachments for the tool, which are used depending on the job. The most popular cutting discs.

It is convenient to use a grinder to cut a hole that cannot be made with another tool.

There are diamond discs. They are designed for cutting tiles, stone, concrete or porcelain stoneware.

There are discs (brushes) for removing old paint from surfaces. This is a wire-bristled brush. Suitable for cleaning painted concrete, wood, plastic and other surfaces.

Brushes are often used to remove rust from metal, smooth out rough surfaces or polish. Align weld seams well with a braid. Minuses: pieces of wire may fly out during operation, processing speed is low, strong vibration.

If you work with a flap disc to clean off the paint, then it quickly clogs up, loses its performance. This can spoil the geometry of the surface.

If you use a regular grinding disc on a grinder, then there will be problems too. It cleans off the paint, but also makes indentations in the main surface. Together with the paint, it "eats" the metal.

For example, you need to clean metal from rust or remove old paint. For this, a petal disc and brushes are usually used. They are not quite suitable for this purpose. There is a disc that was created specifically and only for this.

If you have not tried using the Coral disc, then be sure to try it. You will forget what a petal disc or a brush is.

Circle "Coral" is a non-woven fabric with abrasive grain. Discs are sold differently. There are grinding wheels with a soft structure, and there are discs with thicker and stronger threads and coarse grains. Pros:

• The circle is not clogged with paint or rust when working.
• The treated surface does not heat up,
• The circle does not spoil the geometry of metal and other material.

This miracle circle removes old paint from the surface in an instant. Of course, it is more expensive, but the advantages of a coral disc erase all its disadvantages. Removes paint or rust in a short time without damaging the surface.

I heard many complain, what disk ends quickly (erased).

1. If you clean the sharp edges of the metal with it, then you don't need to rely on long work. Sharp edges will damage any circle like a sharp knife.

2. Wheel wear occurs due to strong pressure. Therefore, do not push the circle harder than necessary.

3. Pay attention to the disc when buying. There are recommended turns during work, which should not be violated. Too high rpm spoil the disc.

Following all the tips, the Coral disc will serve for many years.