Useful content

What kind of water to pour on the stones in the bath: cold or boiling water? Understanding the issue

click fraud protection

Newbies in the bathing business often ask themselves the question: what kind of water to pour on the stove - cold, hot or any? Experienced people are not puzzled by this problem and pour what is at hand. This is, of course, a joke. But what really should be the optimal temperature of the water with which the stones are poured? And in general, is there a difference in this? Let's try to figure it out.

What kind of water to pour on the stones in the bath: cold or boiling water? Understanding the issue

What is the Evaporation Process? Let's get a little clever ...

Evaporation is the transition of water from a liquid to a gaseous state. The reverse process, when steam turns into water, is called condensation. Steam is water molecules that are detached from the structure of the liquid under the influence of kinetic energy, which turned out to be stronger than the intermolecular bonds of water and was able to break them.

Kinetic energy is converted heat energy. When water is heated, the speed of movement of molecules increases - this is how kinetic energy (movement) appears. And at a water temperature of 100 degrees Celsius, water molecules receive enough kinetic energy to break away from the liquid and turn into steam.

instagram viewer

Consequently, the higher the surface temperature of the evaporator, the role of which is played by the heater, the faster and more intensively the water turns into steam. And one more thing: the vaporization process depends on the area of ​​the heated surface and the amount of liquid supplied to it. That is, the larger the heated element and the less liquid, the faster it will turn into steam. Boring? But this is important further!

Interesting stuff - Finnish smoke sauna: a ton of stones, a huge stove, a chimney and a home SPA complex.

So what kind of water to pour on the stones?

Let's consider the options. There are only three of them.

Cold water sharply cools the stones, as a result of which it does not evaporate immediately. A cooled surface cannot transfer enough kinetic energy to water molecules so that they instantly turn into a gas (vapor). There is a danger in this, since water can flood the firebox or get on the heating elements.

Steam from cold water is less hot and therefore condenses intensively when it comes into contact with cold surfaces. It looks like a cloud and is called heavy or damp because it warms little, humidifies the air and makes breathing difficult. And all this is not very good for health. In addition, such steam can have a "swamp" smell.

In order to pour cold water, the heater, roughly speaking, must be red-hot and have a sufficiently large area. But why this is done is not clear, since there should be no problems with hot water in the bath.

Conclusion: it is not worth pouring cold water onto the stove. Especially if several visits are planned to the bath: cold water will cool the stones, and heating them again will take time and increase the consumption of firewood / gas / electricity. In addition, stones with such a temperature difference can crack.

Boiling water, unlike cold water, already has high kinetic energy and not much heat is needed to convert it into steam. Here, the phase of transition from liquid to gas requires less time and energy. And also the water heated to high temperatures practically does not cool the stones.

The steam from boiling water is light, dry and hot. It quickly heats up the room, destroys everything harmful in the air and, in general, is good for health. But strong steam for an amateur - not everyone can withstand it. You need to get used to it.

Conclusion: hot water can and should be poured onto stones; this is especially true for saunas with small heaters. But only this must be done carefully so as not to harm.

Another option is warm water. There is nothing special to say about him - he is neither there nor here! But of course, it is better to pour warm water than cold water. In general, pour either boiling water or hot water over the stones. And do it in small portions - 200-300 ml. All with light steam!

What kind of water do you pour on the stones? And do you add oils and herbs to the water? Write in the comments!

Friends, we are growing and there are already 132 thousand of us! Like, subscribe to the channel, share our life hacks, articles and recipes - we are workingso that you receive only useful and interesting information!

Read also:

  • How orange juice is prepared with a drill and a bottle in Africa: an original way.
  • Why, when cleaning a well, a lighted candle is lowered into it and an aspen shield is placed on the bottom: interesting facts.

Watch the video - Errors during installation of the roof: we answer users' questions.

Goat's milk: useful properties and contraindications

Goat's milk: useful properties and contraindications

Benefits and harms of goat milk - a question vividly interested fans of a healthy lifestyle. The ...

Read More

St. John's Wort: useful properties, applications, recipes, description and photo plants

St. John's Wort: useful properties, applications, recipes, description and photo plants

Benefits and harms of St. John's wort - an interesting question for anyone who is interested in f...

Read More

Installation of a plinth in unusual corners. Master OK

Installation of a plinth in unusual corners. Master OK

Continuing the theme of skirting installation started in the previous two articles.I did not thin...

Read More

Instagram story viewer