They say to me: "The snow will blow your chimney, it was in vain to put it on the roof slope." I show you how I solved this problem (I think it will help).

Yes, looking at such a picture, when the roof is steep and there are no snow holders, then it really becomes anxious for the chimney, which stands below. But it seems to me that you shouldn't worry too much ...

Friends, a big hello to everyone. The fact that the place for installing the chimney, for my stove, I chose was not the most successful, it was already clear. During the editing, I was convinced of this more than once.

Read all the details in the previous articles. on my channel.

But given the fact that I did not want to perforate the roof under the pipe, and I chose the optimal location of the stove, I had to look at the ease of installation last.

Moreover, together with my wife, we somehow managed ...

But it is not enough to put in a chimney, you need it to stay there.

When a piece of pipe is sharpened from the roof, then of course there are no problems. And for such a "mast" as in my house, you need a good mount.

✔ The top was secured with rigid braces. I made them from a 32 mm pipe (I had it idle), it turned out more than reliably.

✔ On the support arm, the pipe just stands. And the main thing here is to make sure that she does not move out anywhere. Therefore, I just put two steel corners, I think it will be enough.

✔ The most unprotected place remains ...

In the comments to previous articles, many wrote to me that snow can blow a pipe. And I understand this perfectly too, but you need to take into account the nuances.

There are no snow holders on my roof, and it is not planned. But my roof slope is quite steep, especially since the metal tile is laid. Therefore, large masses of snow do not accumulate there.

Therefore, a small safety net is needed for the chimney to help withstand this snow melt. Here I also poked a little and made such a fastener.

Since there is no frontal board yet, I attached to the nearest filly. The fastening goes through the clamp, so it turned out quite reliably.

Well, in winter we will check everything in operation ...

Friends, I am waiting for your opinion in the comments. Will such protection be enough, or do you need to come up with something more serious?

subscribe to the channel, and like it 👍. Here is the whole history of building a house with your own hands.