New attachments for grinder and shurik

Nozzles have been the subject of my articles many times. And this is quite understandable. Thanks to their use, the tools familiar to everyone become more convenient and even endowed with new, sometimes even unusual functions. Today I will tell you about a few more attachments that will undoubtedly arouse great interest for home craftsmen.

You can see the beginning of my story about attachments here. by this link.

Grinder attachments

Saw attachment

The saw attachment allows you to turn the grinder familiar to everyone into an electric chain saw.

The use of such a nozzle allows you to save significant amounts, since, as you know, an electric saw is far from cheap. This device will be of great help when you need to saw a small amount of wood.

The packing includes the following structural elements:

• a tank with a system for supplying oil to the saw chain;
• handle for holding the assembled device;
• protective cover.

The design is quite simple, so any home craftsman will be able to assemble the attachment and install it on the grinder.

The length of the tire in the cutting zone is 28 cm, which makes it possible to cut trees or wood blanks, the diameter of which does not exceed this value.

The attachment can be installed on large and small grinders. However, before ordering the device, you should contact the seller to inform him of the thread diameter on the tool clamping ring.

Saw attachment will cost you about 2.5 thousand rubles.

Grinder platform

This device allows you to partially replace a conventional grinder with a pendulum saw. It can be used to safely and accurately cut rolled metal, aluminum and radiator profiles and other materials. On the platform, you can install angle grinders with discs with a diameter of 115 ÷ 125 mm.

The base of the support platform is quite massive. Its permanent fixing is ensured by the presence of two special holes specially designed for this purpose. But even without fastening, the device does not slide on the working surface due to the presence of four rubber feet on its underside.

[info] If you want to know more about woodworking tools and crafts done with them, be sure to check out the material on this link. [/ info]

In addition, the device includes a protective cover for the disc. This allows you to remove the native casing from it before installing the grinder on the platform, which is especially important for cheap grinders that have a simplified fastening of this element.

Grinder platform costs about 1.5 thousand rubles.

Angle screwdriver attachment

Read also How to remove a chuck from a screwdriver

This device appeared quite a long time ago and is available in the toolkits of many craftsmen who assemble furniture or perform professional repairs. This nozzle is nothing more than a right angle adapter. This allows for screwdriving and other operations in hard-to-reach places.

Such a nozzle is indispensable in cases where the screwdriver cannot be used in its normal position due to the limited working space. It is easy to install and remove.

Angle nozzle will cost you about 300 rubles.